Hi All, I hope some of you guys have had experience with what I am trying to do. And that is border sniffing mode. I just want Ntop to tell me how much data goes out of our network and how much data each client receives or sends outside our local network.
The setup. I have a RH8.0 box with Ntop installed on it as a service. I have set the service to start with several command line options: daemon prog$ -j -n -E -m 192.168.1.0/24 -p /home/protocol.list -P /home/admin admin The machine is set on a separate segment with our gateway box which runs Smoothwall. The problem Everything seems to be fine except one thing: The Ntop box seems to register internal traffic as well and that is what I don't want. For example, it tells me that one of our internal servers has done so much traffic, however, that server never sees the light of the Internet, it's just a file server. The only thing that I suspect might be the physical setup of the Ntop box but I'm not sure. How do I get Ntop to register just the Internet traffic???? Any help will be greatly appreciated Thank you Roberto Information contained in this e-mail is intended for the use of the addressee only, and is confidential and may be the subject of Legal Professional Privilege. Any dissemination, distribution, copying or use of this communication without prior permission of the addressee is strictly prohibited.The views of the author may not necessarily constitute the views of Kuju Entertainment Ltd. Nothing in this email shall bind Kuju Entertainment Ltd in any contract or obligation. The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. While Kuju Entertainment has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening the attachment. _______________________________________________ Ntop mailing list [EMAIL PROTECTED] http://listgateway.unipi.it/mailman/listinfo/ntop
