hi,dear sir:
Now,I run ntop-2.1.58 for redhat8.0,that run every half hours,then
crash(segment fault),so I read FAQ,use gdb to check this,that is 'bt full' output:
#0 0x40106e07 in updateInterfacePorts (actualDeviceId=0, sport=4540, dport=1135,
length=117) at pbuf.c:595
No locals.
#1 0x40108d52 in processIpPkt (bp=0x80632a8 "E", h=0xbefff9ec, length=117,
ether_src=0xbefff9a2 "",
ether_dst=0xbefff99c "", actualDeviceId=0, vlanId=-1) at pbuf.c:992
sport = 2002
dport = 1135
ip = {ip_hl = 5, ip_v = 4, ip_tos = 0 '\0', ip_len = 26368, ip_id = 56602,
ip_off = 64,
ip_ttl = 128 '\200', ip_p = 6 '\006', ip_sum = 8216, ip_src = {s_addr = 3549432094},
ip_dst = {
s_addr = 1034988853}}
tp = {th_sport = 53767, th_dport = 28420, th_seq = 3616536699, th_ack =
396808448, th_x2 = 0 '\0',
th_off = 5 '\005', th_flags = 24 '\030', th_win = 16417, th_sum = 63621, th_urp = 0}
up = {uh_sport = 35072, uh_dport = 35072, uh_ulen = 14848, uh_sum = 18730}
icmpPkt = {icmp_type = 0 '\0', icmp_code = 0 '\0', icmp_cksum = 0, icmp_hun =
{ih_pptr = 0 '\0',
ih_gwaddr = {s_addr = 0}, ih_idseq = {icd_id = 0, icd_seq = 0}, ih_void = 0,
ih_pmtu = {ipm_void = 0,
ipm_nextmtu = 0}, ih_rtradv = {irt_num_addrs = 0 '\0', irt_wpa = 0 '\0',
irt_lifetime = 0}},
icmp_dun = {id_ts = {its_otime = 0, its_rtime = 1077657462, its_ttime = 370148982},
id_ip = {idi_ip = {
ip_hl = 0, ip_v = 0, ip_tos = 0 '\0', ip_len = 0, ip_id = 49014, ip_off =
16443, ip_ttl = 118 'v',
ip_p = 6 '\006', ip_sum = 5648, ip_src = {s_addr = 252285139}, ip_dst =
{s_addr = 2198959632}}},
id_radv = {ira_addr = 0, ira_preference = 1077657462}, id_mask = 0, id_data = ""}}
hlen = 20
tcpDataLength = 63
udpDataLength = 50
off = 16384
tcpUdpLen = 83
srcHostIdx = 3
dstHostIdx = 1
srcHost = (struct hostTraffic *) 0x835efe8
dstHost = (struct hostTraffic *) 0x80d94f8
forceUsingIPaddress = 0 '\0'
tvstrct = {tv_sec = 0, tv_usec = 0}
theData = (u_char *) 0x80632d0 ";\003"
ctr = {value = 117, modified = 132 '\204'}
#2 0x4010b8cb in processPacket (_deviceId=0x0, h=0xbefff9ec, p=0x806329a "") at
pbuf.c:2463
pppoe_hdr = (struct pppoe_hdr *) 0x75
---Type <return> to continue, or q <return> to quit---
protocol = 0
ehdr = {ether_dhost = "\0\003?O?, ether_shost = "\0蟹?V", ether_type = 8}
trp = (struct tokenRing_header *) 0x0
fddip = (struct fddi_header *) 0x401390a0
hlen = 14
caplen = 68
headerDisplacement = 0
length = 117
orig_p = (const u_char *) 0x806329a ""
p1 = (const u_char *) 0x0
ether_src = (u_char *) 0xbefff9a2 ""
ether_dst = (u_char *) 0xbefff99c ""
eth_type = 2048
trllc = (struct tokenRing_llc *) 0x75
fd = (struct _IO_FILE *) 0x0
ipxBuffer = "@\206\001@@[EMAIL PROTECTED]@[EMAIL PROTECTED]@[EMAIL
PROTECTED]>[EMAIL PROTECTED]@x?[EMAIL PROTECTED]([EMAIL PROTECTED];[EMAIL
PROTECTED]@", '\0' <repeats 16 times>, "殆?", '\0' <repeats 16 times>, "\f??
actualDeviceId = 0
vlanId = -1
#3 0x4006a1de in pcap_read_packet () from /usr/local/lib/libntopreport-2.1.58.so
No symbol table info available.
#4 0x401039fe in pcapDispatch (_i=0x0) at ntop.c:111
rc = 0
pcap_fd = 11
readMask = {__fds_bits = {2048, 0 <repeats 31 times>}}
#5 0x403b7c0e in pthread_start_thread_event () from /lib/libpthread.so.0
No symbol table info available.
my script is:-P /var/log/ntop -u wangzm -i eth1 -b -o -t 5 -z -g -r 300 -m
192.168.1.0/255.255.255.192 -n -W 4000 -K
_______________________________________________
Ntop mailing list
[EMAIL PROTECTED]
http://listgateway.unipi.it/mailman/listinfo/ntop
