Holy smokes, I enabled the debug in the sflowPlugin.c and started ntop
in terminal, I gets tons of SFLOW_DEBUG that appears to my unskilled
eyes to appear ok.

Where does someone of your expertise recommend I add the traceEvent()
lines?

Regards,
Ted

PS: Aren't replies to mailing lists supposed to be at the bottom?


On Thu, 2003-12-11 at 11:09, Burton M. Strauss III wrote:

 lines
> Understand that InMon donated the initial version of the plugin, but nobody
> I'm aware of has looked at it post 2.2, so the status of this code may not
> be 'up to snuff'.  You might ask the InMon folks if they have an update or
> know of any bug fixes outstanding...
> 
> Otherwise, you're going to have to instrument the plugin and see what's
> going on internally.  Luckily that's easy - the plugin is pretty heavily
> instrumented already via the debug switch.
> 
> The debug lines in the plugin should allow you to trace whether ntop is
> seeing the data and what's happening with it.
> 
> If you need to add more, it's easy - just add traceEvent() lines, recompile
> the plugin and restart ntop.  You'll see examples all over the code - just
> grep -i debug.  The key to a good debug line is to report where you are and
> something meaningful about the data at that point/time.
> 
> 
> -----Burton
> 
> 
> 
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Ted
> > Kaczmarek
> > Sent: Thursday, December 11, 2003 9:53 AM
> > To: [EMAIL PROTECTED]
> > Subject: [Ntop] Banging my head into a wall CVS RH9 and sflow
> >
> >
> > I have exhausted all resources in trying to figure this out.
> > Server is getting sflow data on correct port(ethereal capture confirms),
> > sflow plugin is enabled, looking at Netflows.html shows
> > SflowPlugin as receiving data. All local interface traffic generates
> > beautiful data.
> >
> > If anyone can assist it would be greatly appreciated. Otherwise I guess
> > I will go back to 2.2 which I was getting sflow data statistic for.
> >
> >
> > 10/Dec/2003 14:31:21  Now running as a daemon
> > 10/Dec/2003 14:31:21  **WARNING** AS: Unable to open file
> > 'AS-list.txt.gz'.
> > 10/Dec/2003 14:31:21  I18N: This instance of ntop does not
> > support multiple languages
> > 10/Dec/2003 14:31:21  IP2CC: Looking for IP address <-> Country
> > code mapping file
> > 10/Dec/2003 14:31:21  IP2CC: reading file
> > '/usr/local/etc/ntop/p2c.opt.table.gz'
> > 10/Dec/2003 14:31:21  IP2CC: 49056 records read
> > 10/Dec/2003 14:31:21  Initializing external applications
> > 10/Dec/2003 14:31:21  Initializing semaphores, mutexes and threads
> > 10/Dec/2003 14:31:21  NOTE: atfork() handler registered for mutexes, rc 0
> > 10/Dec/2003 14:31:21  THREADMGMT: Packet processor thread running...
> > 10/Dec/2003 14:31:21  THREADMGMT: Started thread (1090059056) for
> > network packet analyser
> > 10/Dec/2003 14:31:21  THREADMGMT: Idle host scan thread running...
> > 10/Dec/2003 14:31:21  THREADMGMT: Started thread (1098451760) for
> > idle hosts detection
> > 10/Dec/2003 14:31:21  THREADMGMT: Address resolution thread running...
> > 10/Dec/2003 14:31:21  THREADMGMT: Started thread (1106844464) for
> > DNS address resolution
> > 10/Dec/2003 14:31:21  Calling plugin start functions (if any)
> > 10/Dec/2003 14:31:22  Sniffying...
> > 10/Dec/2003 14:31:22  INIT: Created pid file
> > (/usr/local/var/ntop/ntop.pid)
> > 10/Dec/2003 14:31:22  Listening on [eth0]
> > 10/Dec/2003 14:31:22  Now running as requested user 'ntop' (100:102)
> > 10/Dec/2003 14:31:22  Loading Plugins
> > 10/Dec/2003 14:31:22  Searching for plugins in /usr/local/lib/ntop/plugins
> > 10/Dec/2003 14:31:22  ICMP: Welcome to icmpWatchPlugin. (C) 1999
> > by Luca Deri
> > 10/Dec/2003 14:31:22  LASTSEEN: Welcome to LastSeenWatchPlugin.
> > (C) 1999 by Andrea Marangoni
> > 10/Dec/2003 14:31:22  NETFLOW: Welcome to NetFlow.(C) 2002-03 by Luca Deri
> > 10/Dec/2003 14:31:22  NFS: Welcome to nfsWatchPlugin. (C) 1999 by
> > Luca Deri
> > 10/Dec/2003 14:31:23  PDA: Welcome to PDAPlugin. (C) 2001-2002 by
> > L.Deri and W.Brock
> > 10/Dec/2003 14:31:23  SFLOW: Welcome to sFlowPlugin. (C) 2002 by Luca Deri
> > 10/Dec/2003 14:31:26  RRD: Welcome to rrdPlugin. (C) 2002 by Luca Deri.
> > 10/Dec/2003 14:31:26  Calling plugin start functions (if any)
> > 10/Dec/2003 14:31:26  RRD: Welcome to the RRD plugin
> > 10/Dec/2003 14:31:26  RRD: Mask for new directories is 0700
> > 10/Dec/2003 14:31:26  RRD: Mask for new files is 0066
> > 10/Dec/2003 14:31:26  THREADMGMT: rrd thread (1116957488) started
> > 10/Dec/2003 14:31:26  RRD: Started thread (1116957488) for data
> > collection.
> > 10/Dec/2003 14:31:27  SFLOW: Collector listening on port 6343
> > 10/Dec/2003 14:31:27  SFLOW: Welcome to sFlow: listening on UDP port 6343
> > 10/Dec/2003 14:31:27  SSL is present but https is disabled: use
> > -W  for enabling it
> > 10/Dec/2003 14:31:27  Note: Reporting device initally set to 0 [eth0]
> > 10/Dec/2003 14:31:27  WEB: Initializing web server
> > 10/Dec/2003 14:31:27  WEB: Initializing tcp/ip socket connections
> > for web server
> > 10/Dec/2003 14:31:27  FILEDESCRIPTORBUG: Work-around activated
> > 10/Dec/2003 14:31:27  Initialized socket, port 3330, address (any)
> > 10/Dec/2003 14:31:27  WEB: Waiting for HTTP connections on port 3330
> > 10/Dec/2003 14:31:27  WEB: Starting web server
> > 10/Dec/2003 14:31:27  THREADMGMT: web connections thread (7228) started...
> > 10/Dec/2003 14:31:27  THREADMGMT: Started thread (1125350192) for
> > web server
> > 10/Dec/2003 14:31:27  Note: SIGPIPE handler set (ignore)
> > 10/Dec/2003 14:31:27  THREADMGMT: pcap dispatch thread running...
> > 10/Dec/2003 14:31:27  THREADMGMT: Started thread (1133742896) for
> > network packet sniffing on eth0
> >
> > ntop Configuration
> >
> >
> > ntop version.....2.2.97
> > Built on.....12/10/03 02:19:21 PM
> > OS.....i686-pc-linux-gnu (redhat Linux 9)
> > ntop Process Id.....7228
> > http Process Id.....7228
> >
> >
> > Command line
> >
> > Started as....ntop -u ntop -d -w 3330
> >
> > Resolved to....ntop
> >             -u
> >             ntop
> >             -d
> >             -w
> >             3330
> >
> >
> > Command line parameters are:
> >
> > -a | --access-log-path.....(default)   (nil)
> > -b | --disable-decoders.....(default)   No
> > -c | --sticky-hosts.....(default)   No
> > -d | --daemon.....Yes
> > -e | --max-table-rows.....(default)   128
> > -f | --traffic-dump-file.....(default)   (nil)
> > -g | --track-local-hosts.....(default)   Track all hosts
> > -o | --no-mac.....(default)   Trust MAC Addresses
> > -i | --interface   (effective).....eth0
> > -k | --filter-expression-in-extra-frame.....(default)   No
> > -l | --pcap-log.....(default)   (nil)
> > -m | --local-subnets   (effective).....
> > -n | --numeric-ip-addresses.....(default)   No
> > -p | --protocols.....(default)   internal list
> > -q | --create-suspicious-packets.....(default)   Disabled
> > -r | --refresh-time.....(default)   120
> > -s | --no-promiscuous.....(default)   No
> > -t | --trace-level.....(default)   3
> > -u | --user.....ntop (uid=100, gid=102)
> > -w | --http-server.....Active, all interfaces, port 3330
> > -z | --disable-sessions.....(default)   No
> > -B | --filter-expression.....(default)   none
> > -D | --domain.....crownfin.com
> > -F | --flow-spec.....(default)   none
> > -K | --enable-debug.....(default)   No
> > -L | --use-syslog.....daemon
> > -M | --no-interface-merge   (effective).....(parameter -M set,
> > Interfaces separate) No
> > -O | --pcap-file-path.....(default)   /usr/local/var/ntop
> > -P | --db-file-path.....(default)   /usr/local/var/ntop
> > -Q | --spool-file-path.....(default)   /usr/local/var/ntop
> > -U | --mapper.....(default)   (nil)
> > -W | --https-server.....Uninitialized
> > --ssl-watchdog.....(default)   No
> > --p3p-cp.....(default)   none
> > --p3p-uri.....(default)   none
> > --disable-schedYield.....(default)   No
> > --disable-stopcap.....(default)   No
> > --log-extra.....(default)   0
> > --disable-instantsessionpurge.....(default)   No
> > --disable-mutexextrainfo.....(default)   No
> >
> >
> > Note:    (effective)   means that this is the value after ntop
> > has processed the parameter.
> > (default)   means this is the default value, usually (but not
> > always) set by a #define in globals-defines.h.
> >
> >
> >
> > Run time/Internal
> >
> > Web server URL.....http://any:3330
> > SSL Web server (https://).....Not Active
> > GDBM version.....This is GDBM version 1.8.0, as of May 19, 1999.
> > OpenSSL Version.....OpenSSL 0.9.7a Feb 19 2003
> > zlib version.....1.1.4
> > Protocol Decoders.....Enabled
> > Fragment Handling.....Enabled
> > Tracking only local hosts.....No
> > # IP Protocols Being Monitored.....18
> > # Protocol slots.....970
> > # IP Ports Being Monitored.....55
> > # IP Ports slots.....110
> > # Handled SIGPIPE Errors.....0
> > # Handled HTTP Requests.....440
> > WebServer Request Queue.....5
> > Devices (Network Interfaces).....1
> > Domain name (short).....com
> > IP to country flag table (entries).....49056
> > Total Hash Collisions (Vendor/Special) (lookup).....0
> > Local Networks.....10.0.1.0/255.255.255.0 [device eth0]
> >
> >
> > Memory allocation - data segment
> >
> > arena limit, getrlimit(RLIMIT_DATA, ...).....-1
> > Allocated blocks (ordblks).....1735
> > Allocated (arena).....11855648
> > Used (uordblks).....11051848
> > Free (fordblks).....803800
> >
> >
> > Memory allocation - mmapped
> >
> > Allocated blocks (hblks).....3
> > Allocated bytes (hblkhd).....2019328
> >
> >
> > Memory Usage
> >
> > IPX/SAP Hash Size (bytes).....1897
> > IP to country flag table (bytes).....1496064 (1.4 MB)
> > Bytes per entry.....30.5
> > IP to AS (Autonomous System) number table (bytes).....0 (0.0 MB)
> > Current memory usage.....13874976
> > Base memory usage.....4245280
> > Hosts stored (active+cache).....408 = (408 + 0)
> > (very) Approximate memory per host.....23.1KB
> >
> >
> > Host Memory Cache
> >
> > Limit.....#define MAX_HOSTS_CACHE_LEN 512
> > Current Size.....0
> > Maximum Size.....0
> > # Entries Reused.....0
> >
> >
> > MAC/IPX Hash tables
> >
> > IPX/SAP Hash Size (entries).....179
> > IPX/SAP Hash Collisions (load).....0
> > IPX/SAP Hash Collisions (use).....0
> >
> >
> > Packets
> >
> > Received.....3237314
> > Processed immediately.....3237314
> > Queued.....0
> > Current queue.....0
> > Maximum queue.....0
> >
> >
> > Host/Session counts - global
> >
> > Purged hosts.....28287
> > Maximum hosts to purge per cycle.....512
> > DEFAULT_MAXIMUM_HOSTS_PURGE_PER_CYCLE.....512
> > Terminated Sessions.....131,453
> >
> > Host/Session counts - Device 0 (eth0)
> > Hash Bucket Size.....2.0 KB
> > Actual Hash Size.....16384
> > Stored hosts.....408
> > Bucket List Length.....[min 1][max 4][avg 1.1]
> > Max host lookup.....5
> > Session Bucket Size.....260
> > Sessions.....191
> > Max Num. Sessions.....500
> >
> >
> > Address Resolution
> >
> > DNS sniffed:
> >
> > DNS Packets sniffed.....210870
> >   less 'requests'.....105811
> >   less 'failed'.....6639
> >   less 'reverse dns' (in-addr.arpa).....95063
> > DNS Packets processed.....3357
> > Stored in cache (includes aliases).....1633
> >
> >
> > IP to name - ipaddr2str():
> >
> > Total calls.....27194
> > ....OK.....0
> > ....Total not found.....27194
> > ........Not found in cache.....27193
> > ........Too old in cache.....0
> >
> >
> > Queued - dequeueAddress():
> >
> > Total Queued.....27194
> > Not queued (duplicate).....0
> > Maximum Queued.....53
> > Current Queue.....0
> >
> >
> > Resolved - resolveAddress():
> >
> > Addresses to resolve.....27194
> > ....less 'Error: No cache database'.....0
> > ....less 'Found in ntop cache'.....21679
> > Gives: # gethost (DNS lookup) calls.....5515
> >
> >
> > DNS lookup calls:
> >
> > DNS resolution attempts.....5515
> > ....Success: Resolved.....228
> > ....Failed.....5287
> > ........HOST_NOT_FOUND.....5287
> > ........NO_DATA.....0
> > ........NO_RECOVERY.....0
> > ........TRY_AGAIN (don't store).....0
> > ........Other error (don't store).....0
> > DNS lookups stored in cache.....5515
> > Host addresses kept numeric.....5287
> >
> >
> > Vendor Lookup Table
> >
> > Input lines read.....0
> > Records added total.....0
> > .....includes special records.....0
> > getVendorInfo() calls.....0
> > getSpecialVendorInfo() calls.....2587
> > Found 48bit (xx:xx:xx:xx:xx:xx) match.....0
> > Found 24bit (xx:xx:xx) match.....2585
> > Found multicast bit set.....0
> > Found LAA (Locally assigned address) bit set.....0
> >
> >
> > Thread counts
> >
> > Active.....6
> > Dequeue.....1
> > Children (active).....70
> > Directory (search) order
> >
> > Data Files......
> >                           /usr/local/share/ntop
> > Config Files......
> >                             /usr/local/etc/ntop
> >                             /etc
> > Plugins....../plugins
> >                        /usr/local/lib/ntop/plugins
> >
> >
> > Compile Time: ./configure
> >
> > ./configure parameters.....&nbsp;
> > Built on (Host).....i686-pc-linux-gnu
> > Built for(Target).....i686-pc-linux-gnu
> > compiler (cflags).....gcc -g -O2 -I/usr/local/include -Wshadow
> > -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations
> > -Wnested-externs -fPIC -DHAVE_CONFIG_H
> > include path.....-I/tmp/ntopcvs/ntop/myrrd
> > system libraries.....-L/usr/local/lib -L/tmp/ntopcvs/ntop/myrrd
> > -lpthread -lresolv -lnsl -lcrypt -lc -lssl -lcrypto -lpcap -lgdbm
> > -lgd -lpng -lz -lmyrrd
> > install path...../usr/local
> > GNU C (gcc) version.....3.2.2 20030222 (Red Hat Linux 3.2.2-5) (3.2.2)
> >
> >
> > Internationalization (i18n)
> >
> > i18n enabled.....No
> >
> >
> > Compile Time: Debug settings in globals-defines.h
> >
> > DEBUG.....no
> > ADDRESS_DEBUG.....no
> > DNS_DEBUG.....no
> > DNS_SNIFF_DEBUG.....no
> > FTP_DEBUG.....no
> > GDBM_DEBUG.....no
> > HASH_DEBUG.....no
> > HOST_FREE_DEBUG.....no
> > HTTP_DEBUG.....no
> > IDLE_PURGE_DEBUG.....no
> > INITWEB_DEBUG.....no
> > MEMORY_DEBUG.....no
> > NETFLOW_DEBUG.....no
> > SEMAPHORE_DEBUG.....no
> > SESSION_TRACE_DEBUG.....no
> > SSLWATCHDOG_DEBUG.....no
> > STORAGE_DEBUG.....no
> > UNKNOWN_PACKET_DEBUG.....no
> >
> >
> > Compile Time: globals-define.h
> >
> > PARM_PRINT_ALL_SESSIONS.....no
> > PARM_PRINT_RETRANSMISSION_DATA.....no
> > PARM_FORK_CHILD_PROCESS.....yes (normal)
> > CGI Scripts.....globals-defines.h: #define PARM_USE_CGI
> > Alternate row colors.....globals-defines.h: /* #define PARM_USE_COLOR */
> > Buggy gethostbyaddr() - use alternate
> > implementation.....globals-defines.h: /* #define PARM_USE_HOST */
> > MAKE_ASYNC_ADDRESS_RESOLUTION.....yes
> > MAKE_WITH_SSLWATCHDOG.....yes
> > MAKE_WITH_SSLWATCHDOG_RUNTIME (derived).....yes
> > Bad IP Address table size.....globals-defines.h: #define
> > MAX_NUM_BAD_IP_ADDRESSES 3
> > Minimum refresh interval (seconds).....#define
> > PARM_MIN_WEBPAGE_AUTOREFRESH_TIME 15
> > Maximum # of Protocols to show in graphs.....#define MAX_NUM_PROTOS 64
> > Maximum # of routers (Local Subnet Routers report).....#define
> > MAX_NUM_ROUTERS 512
> > Maximum # of network interface devices.....#define MAX_NUM_DEVICES 32
> > Maximum network size (hosts per interface).....#define
> > MAX_SUBNET_HOSTS 1024
> > Allocated # of passive FTP sessions.....#define
> > MAX_PASSIVE_FTP_SESSION_TRACKER 384
> > Inactive passive FTP session timeout (seconds).....#define
> > PARM_PASSIVE_SESSION_MINIMUM_IDLE 60
> >
> >
> > Compile Time: Hash Table Sizes
> >
> > Size.....#define CONST_HASH_INITIAL_SIZE 16384
> >
> >
> > Compile Time: globals-define.h
> >
> > Chart Format.....globals-report.h: #define CHART_FORMAT ".png"
> >
> >
> > Compile Time: config.h
> >
> > CFG_ETHER_HEADER_HAS_EA.....no
> > CFG_MULTITHREADED.....yes
> > HAVE_ALARM.....yes
> > HAVE_ALLOCA.....yes
> > HAVE_ALLOCA_H.....yes
> > HAVE_ARPA_NAMESER_H.....yes
> > HAVE_BACKTRACE.....yes
> > HAVE_BZERO.....yes
> > HAVE_CTIME_R.....yes
> > HAVE_DLFCN_H.....yes
> > HAVE_DL_H.....no
> > HAVE_DOPRNT.....no
> > HAVE_ENDPWENT.....yes
> > HAVE_ERRNO_H.....yes
> > HAVE_FACILITYNAMES.....yes
> > HAVE_FCNTL_H.....yes
> > HAVE_FORK.....yes
> > HAVE_GDBM_H.....yes
> > HAVE_GD_H.....yes
> > HAVE_GDOME_H.....no
> > HAVE_GETHOSTBYADDR.....yes
> > HAVE_GETHOSTBYADDR_R.....yes
> > HAVE_GETHOSTBYNAME.....yes
> > HAVE_GETHOSTNAME.....yes
> > HAVE_GETIPNODEBYADDR.....no
> > HAVE_GETPASS.....yes
> > HAVE_GETTIMEOFDAY.....yes
> > HAVE_GLIBCONFIG_H.....no
> > HAVE_GLIB_H.....no
> > HAVE_IF_H.....no
> > HAVE_IN6_ADDR.....yes
> > HAVE_INT16_T.....yes
> > HAVE_INT32_T.....yes
> > HAVE_INT64_T.....yes
> > HAVE_INT8_T.....yes
> > HAVE_INTTYPES_H.....yes
> > HAVE_LANGINFO_H.....yes
> > HAVE_LIBC.....yes
> > HAVE_LIBCRYPT.....yes
> > HAVE_LIBCRYPTO.....yes
> > HAVE_LIBDL.....no
> > HAVE_LIBDLD.....no
> > HAVE_LIBGD.....yes
> > HAVE_LIBGDBM.....yes
> > HAVE_LIBGDOME.....no
> > HAVE_LIBGLIB.....no
> > HAVE_LIBM.....no
> > HAVE_LIBNSL.....yes
> > HAVE_LIBPCAP.....yes
> > HAVE_LIBPNG.....yes
> > HAVE_LIBPOSIX4.....no
> > HAVE_LIBPTHREAD.....yes
> > HAVE_LIBPTHREADS.....no
> > HAVE_LIBRESOLV.....yes
> > HAVE_LIBRT.....no
> > HAVE_LIBSOCKET.....no
> > HAVE_LIBSSL.....yes
> > HAVE_LIBWRAP.....no
> > HAVE_LIBXML2.....no
> > HAVE_LIBXNET.....no
> > HAVE_LIBZ.....yes
> > HAVE_LIMITS_H.....yes
> > HAVE_LINUX_IF_PPPOX_H.....yes
> > HAVE_LOCALE_H.....yes
> > HAVE_LOCALTIME_R.....yes
> > HAVE_LONG_DOUBLE.....yes
> > HAVE_MATH_H.....yes
> > HAVE_MEMCHR.....yes
> > HAVE_MEMORY_H.....yes
> > HAVE_MEMSET.....yes
> > HAVE_NDIR_H.....no
> > HAVE_NETDB_H.....yes
> > HAVE_OPENSSL.....yes
> > HAVE_OPENSSL_CRYPTO_H.....yes
> > HAVE_OPENSSL_ERR_H.....yes
> > HAVE_OPENSSL_PEM_H.....yes
> > HAVE_OPENSSL_RSA_H.....yes
> > HAVE_OPENSSL_SSL_H.....yes
> > HAVE_OPENSSL_X509_H.....yes
> > HAVE_PCAP_H.....yes
> > HAVE_PCAP_OPEN_DEAD.....yes
> > HAVE_PNG_H.....yes
> > HAVE_PTHREAD_ATFORK.....yes
> > HAVE_PTHREAD_H.....yes
> > HAVE_PUTENV.....yes
> > HAVE_PWD_H.....yes
> > HAVE_RE_COMP.....yes
> > HAVE_REGCOMP.....yes
> > HAVE_REGEX.....yes
> > HAVE_SCHED_H.....yes
> > HAVE_SCHED_YIELD.....yes
> > HAVE_SECURITY_PAM_APPL_H.....yes
> > HAVE_SELECT.....yes
> > HAVE_SEMAPHORE_H.....yes
> > HAVE_SETJMP_H.....yes
> > HAVE_SHADOW_H.....yes
> > HAVE_SIGNAL_H.....yes
> > HAVE_SNPRINTF.....yes
> > HAVE_SOCKET.....yes
> > HAVE_SQRT.....yes
> > HAVE_STDARG_H.....yes
> > HAVE_STDDEF_H.....yes
> > HAVE_STDIO_H.....yes
> > HAVE_STDLIB_H.....yes
> > HAVE_STRCASECMP.....yes
> > HAVE_STRCHR.....yes
> > HAVE_STRCSPN.....yes
> > HAVE_STRDUP.....yes
> > HAVE_STRERROR.....yes
> > HAVE_STRFTIME.....yes
> > HAVE_STRING_H.....yes
> > HAVE_STRINGS_H.....yes
> > HAVE_STRNCASECMP.....yes
> > HAVE_STRPBRK.....yes
> > HAVE_STRRCHR.....yes
> > HAVE_STRSPN.....yes
> > HAVE_STRSTR.....yes
> > HAVE_STRTOK_R.....yes
> > HAVE_STRTOUL.....yes
> > HAVE_SYS_DIR_H.....no
> > HAVE_SYS_IOCTL_H.....yes
> > HAVE_SYS_LDR_H.....no
> > HAVE_SYS_NDIR_H.....no
> > HAVE_SYS_RESOURCE_H.....yes
> > HAVE_SYS_SCHED_H.....no
> > HAVE_SYS_SOCKIO_H.....no
> > HAVE_SYS_TIME_H.....yes
> > HAVE_SYS_TYPES_H.....yes
> > HAVE_SYS_UN_H.....yes
> > HAVE_TCPD_H.....yes
> > HAVE_TM_ZONE.....yes
> > HAVE_TZNAME.....no
> > HAVE_U_INT16_T.....yes
> > HAVE_U_INT32_T.....yes
> > HAVE_U_INT64_T.....yes
> > HAVE_UINT64_T.....no
> > HAVE_U_INT8_T.....yes
> > HAVE_UNAME.....yes
> > HAVE_UNISTD_H.....yes
> > HAVE_VFORK.....yes
> > HAVE_VFORK_H.....no
> > HAVE_VPRINTF.....yes
> > HAVE_WORKING_FORK.....yes
> > HAVE_WORKING_VFORK.....yes
> > HAVE_ZLIB_H.....yes
> > MAKE_WITH_I18N.....no
> > MAKE_WITH_SSLV3_SUPPORT.....no
> > MAKE_WITH_SSLWATCHDOG_COMPILETIME.....no
> > MAKE_WITH_XMLDUMP.....no
> > MAKE_WITH_ZLIB.....yes
> > __PROTOTYPES.....yes
> > PROTOTYPES.....yes
> > SETVBUF_REVERSED.....no
> > TIME_WITH_SYS_TIME.....yes
> > TM_IN_SYS_TIME.....no
> > CFG_CONFIGFILE_DIR - config file directory...../usr/local/etc/ntop
> > CFG_DATAFILE_DIR - data file directory...../usr/local/share/ntop
> > CFG_DBFILE_DIR - database file directory...../usr/local/var/ntop
> > CFG_PLUGIN_DIR - plugin file directory...../usr/local/lib/ntop/plugins
> > CFG_RUN_DIR - run file directory...../usr/local/var/ntop
> > CFG_NEED_GETDOMAINNAME (getdomainname(2) function).....yes
> > CFG_xxxxxx_ENDIAN (Hardware Endian).....little
> > HAVE_FILEDESCRIPTORBUG.....yes
> >
> >
> > Compile Time: globals-defines.h
> >
> > EMSGSIZE.....90
> > ETHERMTU.....1500
> > LEN_CMDLINE_BUFFER.....4096
> > LEN_FGETS_BUFFER.....512
> > LEN_GENERAL_WORK_BUFFER.....1024
> > LEN_MEDIUM_WORK_BUFFER.....64
> > LEN_SMALL_WORK_BUFFER.....24
> > LEN_TIME_STAMP_BUFFER.....2
> > MAKE_NTOP_PACKETSZ_DECLARATIONS.....no
> > MAKE_RMON_SUPPORT.....yes
> > MAKE_WITH_FORK_COPYONWRITE.....yes
> > MAKE_WITH_HTTPSIGTRAP.....no
> > MAKE_WITH_NETFLOWSIGTRAP.....no
> > MAKE_WITH_RRDSIGTRAP.....no
> > MAKE_WITH_SCHED_YIELD.....yes
> > MAKE_WITH_SEMAPHORES.....yes
> > MAKE_WITH_SSLWATCHDOG.....yes
> > MAKE_WITH_SSLWATCHDOG_RUNTIME.....yes
> > MAKE_WITH_SYSLOG.....yes
> > MAX_ADDRESSES.....35
> > MAX_ALIASES.....35
> > MAX_ASSIGNED_IP_PORTS.....1024
> > MAXCDNAME.....255
> > MAX_DEVICE_NAME_LEN.....64
> > MAXDNAME.....1025
> > MAX_HASHDUMP_ENTRY.....65535
> > MAXHOSTNAMELEN.....64
> > MAX_HOSTS_CACHE_LEN.....512
> > MAX_IP_PORT.....65534
> > MAXLABEL.....63
> > MAX_LANGUAGES_REQUESTED.....4
> > MAX_LANGUAGES_SUPPORTED.....8
> > MAX_LASTSEEN_TABLE_SIZE.....4096
> > MAX_LEN_VENDOR_NAME.....64
> > MAX_NFS_NAME_HASH.....12288
> > MAX_NODE_TYPES.....8
> > MAX_NUM_BAD_IP_ADDRESSES.....3
> > MAX_NUM_CONTACTED_PEERS.....8
> > MAX_NUM_DEQUEUE_THREADS.....yes
> > MAX_NUM_DEVICES.....32
> > MAX_NUM_DHCP_MSG.....8
> > MAX_NUM_FIN.....4
> > MAX_NUM_IGNOREDFLOWS.....32
> > MAX_NUM_NETWORKS.....32
> > MAX_NUM_PROBES.....16
> > MAX_NUM_PROTOS.....64
> > MAX_NUM_PROTOS_SCREENS.....5
> > MAX_NUM_PURGED_SESSIONS.....512
> > MAX_NUM_PWFILE_ENTRIES.....32
> > MAX_NUM_ROUTERS.....512
> > MAX_NUM_STORED_FLAGS.....4
> > MAX_NUM_UNKNOWN_PROTOS.....5
> > MAX_PASSIVE_FTP_SESSION_TRACKER.....384
> > MAX_PER_DEVICE_HASH_LIST.....65535
> > MAX_SESSIONS_CACHE_LEN.....512
> > MAX_SSL_CONNECTIONS.....32
> > NAME_MAX.....255
> > NETDB_SUCCESS.....0
> > NS_CMPRSFLGS.....192
> > NS_MAXCDNAME.....255
> > PACKETSZ.....512
> > PARM_ENABLE_EXPERIMENTAL.....no
> > PARM_FORK_CHILD_PROCESS.....yes
> > PARM_MIN_WEBPAGE_AUTOREFRESH_TIME.....15
> > PARM_PASSIVE_SESSION_MINIMUM_IDLE.....60
> > PARM_SESSION_PURGE_MINIMUM_IDLE.....600
> > PARM_SHOW_NTOP_HEARTBEAT.....no
> > PARM_SSLWATCHDOG_WAITWOKE_LIMIT.....5
> > PARM_USE_CGI.....yes
> > PARM_USE_COLOR.....no
> > PARM_USE_HOST.....no
> > PARM_USE_MACHASH_INVERT.....yes
> > PARM_USE_SESSIONS_CACHE.....no
> > PARM_WEDONTWANTTOTALKWITHYOU_INTERVAL.....300
> > THREAD_MODE.....MT (SSL)
> >
> >
> > PLUGINS:
> >
> > RRD:
> > RRD path...../usr/local/var/ntop/rrd
> > New directory permissions.....0700
> > New file umask.....0066
> >
> > Thanks,
> > Ted
> > _______________________________________________
> > Ntop mailing list
> > [EMAIL PROTECTED]
> > http://listgateway.unipi.it/mailman/listinfo/ntop
> >
> 
> _______________________________________________
> Ntop mailing list
> [EMAIL PROTECTED]
> http://listgateway.unipi.it/mailman/listinfo/ntop
_______________________________________________
Ntop mailing list
[EMAIL PROTECTED]
http://listgateway.unipi.it/mailman/listinfo/ntop

Reply via email to