The plugin hasn't been touched since InMon donated it back when. So if the Foundry box has a non-standard configuration the same tweaks will be required.
There was a long thread in the runup to 3.0 from somebody who had some configuration problems - you might look in the back traffic and read it... -----Burton > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Chris > Moore - GMD > Sent: Friday, April 16, 2004 10:43 PM > To: '[EMAIL PROTECTED]' > Subject: [Ntop] RE: Ntop digest, Vol 1 #1530 - 14 msgs > > > FWIW, my Foundry FES9604 SFlow config looks like this: > > globally: > > sflow enable > sflow polling-interval 10 > sflow destination 10.12.23.201 (NTop box) > > and for each interface I want info about: > > interface ethernet 79 > sflow-forwarding > > IIRC (a big IF!) I had to set the recieve port to 6343 in Ntop rather than > just letting it default to make it work. That was in 2.x > though.......and it > may have just been something I tried while trying to figure out how it > should work! > > C <snip /> _______________________________________________ Ntop mailing list [EMAIL PROTECTED] http://listgateway.unipi.it/mailman/listinfo/ntop
