> > Tim > it might be that ntop has troubles decoding some packets flowing in > your network. A debugging session (gdb etc) is necessary, however I > suggest you to use the ntop code that's on SVN first and see if it > works. > > Thanks, luca > >
Stole a copy of libfreetype.la from my zenoss install, and ntop compiled just fine. But it still dies quickly. Now it dies after only a few seconds. Again, there's nothing in the logs. > On Dec 15, 2007, at 4:05 AM, Tim Boyer wrote: > > > I'm running ntop 3.31 on a RHEL5 system. It installed without a > > problem, > > and starts right up without any errors: > > > > [EMAIL PROTECTED] log]# /etc/init.d/ntop start > > Starting ntop: Processing file /etc/ntop.conf for parameters... > > Fri Dec 14 21:50:24 2007 NOTE: Interface merge enabled by default > > Fri Dec 14 21:50:24 2007 Initializing gdbm databases > > > > It runs for a few minutes; I can go to the web page. But after a > > couple of > > minutes: > > > > [EMAIL PROTECTED] log]# ps -ef|grep ntop > > root 9698 5698 0 21:55 pts/0 00:00:00 grep ntop > > > > Syslog shows the startup - but nothing at all when the process dies. > > > > I'm not sure where to start tracking this one down. A > nudge in the > > right > > direction wouldc be greatly appreciated. > > > > Thanks, > > > > -- > > Tim Boyer > > Chief Technology Officer > > Denman Tire Corporation > > [EMAIL PROTECTED] > > > > _______________________________________________ > > Ntop mailing list > > [email protected] > > http://listgateway.unipi.it/mailman/listinfo/ntop > > _______________________________________________ > Ntop mailing list > [email protected] > http://listgateway.unipi.it/mailman/listinfo/ntop _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop
