Wanted to add ALL servers, both physical and virtual are experiencing this
From: [email protected] To: [email protected] Subject: RE: [NTSysADM] time not syncing Date: Mon, 17 Feb 2014 11:03:56 -0500 yep, no change Jean-Paul Natola > Date: Mon, 17 Feb 2014 08:00:29 -0800 > Subject: Re: [NTSysADM] time not syncing > From: [email protected] > To: [email protected] > > Have you tried "w32tm /config /update"? > > Kurt > > On Mon, Feb 17, 2014 at 7:50 AM, J- P <[email protected]> wrote: > > Hi all, > > > > i have follows these instructions to the letter, and have confirmed the > > values exist and are accurate in the registry of the 2008r2 DC, it remains > > 10 minutes off > > > > All the computers, clients and servers, have the same time so its not > > causing any authentication issues (thankfully) but its annoying not be able > > to get the correct time > > > > First, locate your PDC Server. Open the command prompt and type: C:\>netdom > > /query fsmo > > Log in to your PDC Server and open the command prompt. > > Stop the W32Time service: C:\>net stop w32time > > Configure the external time sources, type: C:\> w32tm /config > > /syncfromflags:manual > > /manualpeerlist:”0.pool.ntp.org,1.pool.ntp.org,2.pool.ntp.org” > > Make your PDC a reliable time source for the clients. Type: C:\>w32tm > > /config /reliable:yes > > Start the w32time service: C:\>net start w32time > > The windows time service should begin synchronizing the time. You can check > > the external NTP servers in the time configuration by typing: C:\>w32tm > > /query /configuration > > > > > > when i run this command w32tm /stripchart /computer:0.pool.ntp.org > > /samples:5 /dataonly > > > > C:\>w32tm /stripchart /computer:0.pool.ntp.org /samples:5 /dataonly > > Tracking 0.pool.ntp.org [15.126.193.186:123]. > > Collecting 5 samples. > > The current time is 2/17/2014 10:55:41 AM. > > 10:55:41, -607.5560514s > > 10:55:43, -607.5602488s > > 10:55:45, -607.5647196s > > 10:55:47, -607.5687176s > > 10:55:49, -607.5880149s > >
