No commas for delimiting the peer list. manualpeerlist:<peers> - sets the manual peer list to <peers>, > which is *a space-delimited list of DNS and/or IP addresses*. > When specifying multiple peers, this switch must be enclosed in > quotes. >
-- Espi On Mon, Feb 17, 2014 at 7:50 AM, J- P <[email protected]> wrote: > Hi all, > > i have follows these instructions to the letter, and have confirmed the > values exist and are accurate in the registry of the 2008r2 DC, it remains > 10 minutes off > > All the computers, clients and servers, have the same time so its not > causing any authentication issues (thankfully) but its annoying not be able > to get the correct time > > > 1. First, locate your PDC Server. Open the command prompt and type: > *C:\>netdom > /query fsmo* > 2. Log in to your PDC Server and open the command prompt. > 3. Stop the W32Time service: *C:\>net stop w32time* > 4. Configure the external time sources, type: *C:\> w32tm /config > /syncfromflags:manual /manualpeerlist:"0.pool.ntp.org > <http://0.pool.ntp.org>,1.pool.ntp.org > <http://1.pool.ntp.org>,2.pool.ntp.org <http://2.pool.ntp.org>"* > 5. Make your PDC a reliable time source for the clients. Type:* > C:\>w32tm /config /reliable:yes* > 6. Start the w32time service: *C:\>net start w32time* > 7. The windows time service should begin synchronizing the time. You > can check the external NTP servers in the time configuration by typing: > *C:\>w32tm > /query /configuration* > > > when i run this command w32tm /stripchart /computer:0.pool.ntp.org/samples:5 > /dataonly > > C:\>w32tm /stripchart /computer:0.pool.ntp.org /samples:5 /dataonly > Tracking 0.pool.ntp.org [15.126.193.186:123]. > Collecting 5 samples. > The current time is 2/17/2014 10:55:41 AM. > 10:55:41, -607.5560514s > 10:55:43, -607.5602488s > 10:55:45, -607.5647196s > 10:55:47, -607.5687176s > 10:55:49, -607.5880149s >
