|
You can't use that config file but you should be able to do a
REG BACKUP
HKLM\System\CurrentControlSet\Services\DHCPServer\Configuration dhcpconf.cfg
\\source
and then do
REG RESTORE dhcpconf.cfg
HKLM\System\CurrentControlSet\Services\DHCPServer\Configuration \\destination
Andrew
Right I know the manual method works, I need to
do the same thing in a batch file...I have tried "reg restore" and "regedit
/S" neither imported the file.
----- Original Message -----
Sent: Tuesday, August 21, 2001 8:28
AM
Subject: RE: How to move DHCP from one
server to another - hardware upgrad e - not OS upgrade
use regedt32.
Navigate to HKLM\System\CurrentControlSet\Services\DHCPServer and
highlight configuration key.
Click on File, Import and select the dhcpcfg file
I have done this lots of times and the only thing to be aware of is
that the original and new machine are the same SP.
What I still want to know is : how to import that registry
file from the command line........
"reg.exe" doesn't work with the DHCP registry
file
and neither does
regedit /s
Robert
In the article at Technet it describes a new utility called
DHCPExIm.exe on the Win2K ResourceKit Supp. 1
Has anyone used this utility yet? I need to move my DHCP
also, and was wondering if this works....
Diane
I think I used these instructions when I did
it.
I have done it once and it
worked, but like Kevin says, YMMV.
Regards
Rene
There is a technet article.
Your Mileage May Vary, these are updated instructions since I
tried to do this about a year ago, it didn't work for a crap back
then.
Good luck,
Kevin
+-------------------------------------------------------------------+
Kevin
Flanagan
C/S Planning Engineer III
I/T Implementation
Department
Branch Banking & Trust Company
3261 Atlantic Avenue, Suite
116
MC:
172-85-01-00
Raleigh, NC 27604
Voice: 919-716-6209
Has anyone moved/copied DHCP from one server to another ?
This is a total PC replacement (hardware upgrade only - not
OS)
or
Does anyone KNOW of a command line way
to import the backup
registry file. e
\winnt\system32\DHCP\backup\DHCPcfg , (it is a binary file)
?
thx,
rey
Unfortunately, it is a binary file, not an
ascii test file.....
rey
open it with
notepad.
Kevinm QWSZC, VRY+Y,
NFH, SAD-VF, DERSDESDFG
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
More letters after my
names makes me Smarter.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
please respond back to
rent this ad space for your needs
DHCP server creates its own
registry backup i.e \winnt\system32\DHCP\backup\DHCPcfg the
file has no extension. It can be imported to the
registry using the regedt32 utility, however, I need to
import it in a batch file.
I have tried regedit
/s
I have tried reg from the resource
kit
neither
work.......................
Does anyone KNOW of a command line
way to import that particular registry
file.
TIA
Robert E Young
MCSE
Dallas, TX
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
***
The information in this e-mail is
confidential and intended solely for the individual or entity to whom
it is addressed. If you have received this e-mail in error please
notify the sender by return e-mail, delete this e-mail, and refrain
from any disclosure or action based on the information.
**** http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
|
