I have heard of similar situations. Best advice I have to get away from 2
NICS on one card. I've had good luck with 2 separate Intel server NICS and
then doing the Load Balancing.
-----Original Message-----
From: Matt Wehnes [mailto:[EMAIL PROTECTED]]
Sent: Thursday, September 13, 2001 11:04 AM
To: NT System Admin Issues
Subject: NIC Load Balancing
Recently I installed a Intel Pro 100/S Dual Port NIC. Then proceeded to
configure a load balancing array consisting of the 2 ports on the Intel NIC.
Both ports where then connected to a 3Com 3300 switch.
Everything worked like expected expect, except for intermittent activity
with the printers.
Sometimes they would print other times end-user will get message like
"printer unavailable or not connected".
I tried pinging the printers IP, I would get 2/4 or 3/4 or 0/4 reply's back,
randomly.
Print Server - NT4 sp6a
Clients - NT4 sp6a
All printers are one of three types- HP 4000, 5M, 2500CM
Has one experienced this before or have any advice?
Matt Wehnes
System Administrator
Morton Machining & MFG
(309) 266-6551 x12
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
http://www.sunbelt-software.com/ntsysadmin_list_charter.htm
