Yes, RS232 is the only method. VT100, 9600 baud, 8 data bits, no parity, 1
stop bit, no flow control.
-----Original Message-----
From: David Elebute [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 25, 2001 12:36 PM
To: NT System Admin Issues
Subject: RE: Ascend Pipeline ISDN router
You will need to RS-232 to the box to configure it. We currently use the
Pipeline 130 as our backup and I had to configure it that way.
David Elebute
Director of MIS
SuperClubs
(MCP,CCNA)
U.S. Office 954.925.0925 Ext. 5631 or 800.467.8737
JA - 800.417.5288 Ext. 5631
Email: [EMAIL PROTECTED] or delebute@ inetmail.att.net
U.S. Pager: 954-469-2111 / 866-577-2833
U.S. Cellular Phone: 954.803.5790
JA Cellular Phone: 876.995.6476
BR Cellular Phone: 5571-91223890
Fax: 954.921.7105
********************************************
This email is confidential and intended solely for the use of the individual
to whom it is addressed. Any views or opinions presented are solely those of
the author and do not necessarily represent those of SuperClubs. If you are
not the intended recipient, be advised that you have received this email in
error and that any use, dissemination, forwarding, printing, or copying of
this email is strictly prohibited. If you have received this email in error
please contact the sender.
********************************************
-----Original Message-----
From: Daniel Chenault [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 25, 2001 02:07 PM
To: NT System Admin Issues
Subject: Re: Ascend Pipeline ISDN router
The last time I used a Pipeline Ascend had the user manuals online. Now that
Lucent has fully acquired Ascend I don't know if that is still the case but
it would be worth taking a look.
----- Original Message -----
From: "Bauschek, Joe" <[EMAIL PROTECTED]>
To: "NT System Admin Issues" <[EMAIL PROTECTED]>
Sent: Tuesday, September 25, 2001 9:23 AM
Subject: Ascend Pipeline ISDN router
> A client needs an Ascend Pipeline router configured. Does anyone
> know if these routers have a default address so I can telnet into it. Or
> must I connect to them via RS-232 to initially set them up.
>
> Regards - Joe Bauschek
> Network Engineer
> Medical Information Management Systems, LLC.
> [EMAIL PROTECTED]
>
>
>
> Want to unsub? Do that here:
>
http://lyris.sunbelt-software.com/scripts/lyris.pl?enter=ntsysadmin&text_mod
e=0&lang=english
>
Want to unsub? Do that here:
http://lyris.sunbelt-software.com/scripts/lyris.pl?enter=ntsysadmin&text_mod
e=0?=english
Want to unsub? Do that here:
http://lyris.sunbelt-software.com/scripts/lyris.pl?enter=ntsysadmin&text_mod
e=0&lang=english
Want to unsub? Do that here:
http://lyris.sunbelt-software.com/scripts/lyris.pl?enter=ntsysadmin&text_mode=0&lang=english
