Good afternoon all, I have a working Juniper NS-5GT that I have used to create a VPN tunnel back to HO using an ADSL connection (I have verified that everything is functioning correctly). Now....What I'm trying to do is put a smart hub in the mix so that if I lose an ADSL line I could put one of these in place (wi-fi connection) until the ADSL gets repaired. I've tried all sorts of configuration changes but can't get it to allow the tunnel.
So here's the setup. NS-5GT IP 10.240.30.1 DHCP 10.240.30.100-110 Smart Hub IP scheme can't be changed apparently Hub IP 192.168.20.1 It will hand out DHCP addresses It does have a static internet address Setup as a gateway I've tried setting the untrust IP as 192.168.20.1 and the default route to use the public IP, setting the untrust ip as the public ip....pretty much all the different combinations that I could think of. As far as I know there is no filtering going on with this smart hub. It looks like it's hitting my main firewall across the Internet, but it's not going any further than telling me "Phase 1: Retransmission limit has been reached". Now nothing on the two firewalls have changed so I know that the security settings DO work when I take the smarthub out and use an ADSL connection. If there is any information that I've forgotten to include, please let me know. Any ideas? TIA! Cameron ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to [email protected] with the body: unsubscribe ntsysadmin
