If the Smarthub is employing NAT, then you're going to have a problem
setting up your IPSec tunnel.

I take it the ADSL is not employing NAT?

* *

*ASB* *http://XeeMe.com/AndrewBaker* *Harnessing the Advantages of
Technology for the SMB market…

*



On Tue, Nov 22, 2011 at 3:59 PM, Cameron <[email protected]> wrote:

> Good afternoon all,
>
> I have a working Juniper NS-5GT that I have used to create a VPN tunnel
> back to HO using an ADSL connection (I have verified that everything is
> functioning correctly). Now....What I'm trying to do is put a smart hub in
> the mix so that if I lose an ADSL line I could put one of these in place
> (wi-fi connection) until the ADSL gets repaired. I've tried all sorts of
> configuration changes but can't get it to allow the tunnel.
>
> So here's the setup.
> NS-5GT
> IP 10.240.30.1
> DHCP 10.240.30.100-110
>
> Smart Hub IP scheme can't be changed apparently
> Hub IP 192.168.20.1
> It will hand out DHCP addresses
> It does have a static internet address
> Setup as a gateway
>
> I've tried setting the untrust IP as 192.168.20.1 and the default route to
> use the public IP, setting the untrust ip as the public ip....pretty much
> all the different combinations that I could think of. As far as I know
> there is no filtering going on with this smart hub.
>
> It looks like it's hitting my main firewall across the Internet, but it's
> not going any further than telling me "Phase 1: Retransmission limit has
> been reached". Now nothing on the two firewalls have changed so I know that
> the security settings DO work when I take the smarthub out and use an ADSL
> connection.
>
> If there is any information that I've forgotten to include, please let me
> know.
>
> Any ideas?
>
> TIA!
> Cameron
>
>
>
>

~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to [email protected]
with the body: unsubscribe ntsysadmin

Reply via email to