> do I really need to count 0 and 1, it was like 40 year ago I took Binary in > school.
Your computer still uses it though so it's going to be difficult to properly support if you don't know how it works. Thanks, Brian Desmond [email protected] w - 312.625.1438 | c - 312.731.3132 From: Stefan Jafs [mailto:[email protected]] Sent: Monday, January 09, 2012 3:33 PM To: NT System Admin Issues Subject: Re: Expaning Subnet again Just to get things right: if i go with Subnet: 255.255.252.0 I can then have my range from: 192.168.0.0 -> 192.168.3.255 with 192.168.0.0 = Subnet Address and 192.168.3.255 = Broadcast Address. And yes I did get the "Advanced Subnet Calculator", do I really need to count 0 and 1, it was like 40 year ago I took Binary in school. Anyhow thanks all for your help as usual. Stefan On Mon, Jan 9, 2012 at 3:35 PM, Heaton, Joseph@DFG <[email protected]<mailto:[email protected]>> wrote: .255 is broadcast Joe Heaton ITB - Windows Server Support From: Stefan Jafs [mailto:[email protected]<mailto:[email protected]>] Sent: Monday, January 09, 2012 10:31 AM To: Heaton, Joseph@DFG; NT System Admin Issues Subject: Re: Expaning Subnet again Yes I have x.0 and x.256 excluded anyhow, and assume the brodcast is 192.168.3.256 not 254, right. On Mon, Jan 9, 2012 at 12:47 PM, Kurt Buff <[email protected]<mailto:[email protected]>> wrote: On Mon, Jan 9, 2012 at 09:07, Stefan Jafs <[email protected]<mailto:[email protected]>> wrote: > I know we already talked about extending IP's last week, however, I'm trying > to figure out how to add additional ranges and can't seem to figure it out. > > I currently have 192.168.0.0 - 192.168.0.256 and 192.168.1.1 - 192168.1.256 > with a subnet Mask of 255.255.254.0. If I change the subnet to > 255.255.252.0, can I then simply add: > > 192.168.2.0 - 192.168.2.256 and 192.168.3.0 - 192.168.3.256? Aside from the fact that you should not use 192.168.0.0 or 192.168.1.0 [1], you will at that point have a single subnet of 192.168.0.0 to 192.168.3.255, with 192.168.0.0 being your subnet address and 192.168.3.254 being your broadcast address. Kurt [1] Too much consumer and other equipment uses those to /24 subnets as their default, and people don't tend to change them. Thus, using them is not a good idea, especially if you have people connecting via VPN to your environment. ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to [email protected]<mailto:[email protected]> with the body: unsubscribe ntsysadmin -- Stefan Jafs ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to [email protected]<mailto:[email protected]> with the body: unsubscribe ntsysadmin ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to [email protected]<mailto:[email protected]> with the body: unsubscribe ntsysadmin -- Stefan Jafs ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to [email protected]<mailto:[email protected]> with the body: unsubscribe ntsysadmin ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to [email protected] with the body: unsubscribe ntsysadmin
