This is a machine that's been in service a long time. The NIC that I was assigning to the SAN network had been set up previously, and I did change the IP address and subnet mask, and removed the DG, DNS and WINS settings.
I didn't dive deeply enough - someone had at some point set the NIC for 100mbit. I changed it to 1gbit, and it's now doing just fine. Kurt On Tue, Mar 6, 2012 at 18:06, Kurt Buff <[email protected]> wrote: > All, > > I've got a Dell PE2950 running Win2k3 R2 SP2 with Intel Pro/1000 MT > NICs, fully patched, and I just installed the iSCSI initiator, and am > trying to set up a LUN on a Lefthand SAN. > > It sees the LUN, and I was able to use diskpart to align the partition > (create partition primary align=1024), but when I used the GUI to > format the partition and assign a drive letter I keep getting event > IDs 34, 39, 20, 49 and 7 from iScsiPrt in the System event log - about > once a minute for the complete set. > > I have never run into anything like this, and have looked at > http://eventid.net and have googled, but am not finding much on this. > > Anyone seen anything like this and have an idea where to start looking? > > Kurt ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to [email protected] with the body: unsubscribe ntsysadmin
