*Finally, I also invested some money on a couple APC UPS’ (~$175/ea range)
that can sustain everything for more than 2 or 3 minutes and that have
little LCD readouts on them that show load and power info. Even living in a
major city, the power gets a little screwy sometimes, especially during
summer storms (this weekend in fact). It doesn‘t always go out but it gets
dirty enough to get out of the tolerances on the UPS’.*

Indeed!

My new friend is CyberPower.

* *

*ASB* *http://XeeMe.com/AndrewBaker* *Harnessing the Advantages of
Technology for the SMB market…

*



On Tue, Apr 17, 2012 at 8:06 PM, Brian Desmond <[email protected]>wrote:

>  *I don’t have a wireless router. Essentially what I have is a bit
> complicated but very manageable:*
>
> * *
>
> **·         ***My Comcast comes into my home office in the basement.
> There’s a Cisco 1741 I acquired which the Internet and Wireless hang off of.
> *
>
> **·         ***I have a pair of Dell 8 port GigE managed switches (like
> 75 bucks each) that all my stuff (PCs, phone, printer, MFP, etc.) plugs
> into in the basement*
>
> **o   ***The “management” interface on these things is craptastic, but
> the price/functionality ratio was right and they are fan-less*
>
> **·         ***Said switches have a Cisco 11something WAP attached which
> I acquired several of at a somewhat questionably exceedingly low price on
> ebay – general WiFi SSID is hosted here*
>
> **·         ***Upstairs in my living room, I have another one of the Dell
> switches under the TV – a second Cisco 11something WAP is bridging the
> network up to there from the basement, and my Media Center, XBOX, etc. are
> all plugged in*
>
> **·         ***The new DLink is hanging off the living room switch with a
> different SSID and is really dedicated to servicing my media center
> extender xbox in the bedroom as I was getting poor perf for HD over
> 802.11G. *
>
> * *
>
> *At some point I might just replace the Cisco WAP in the basement with
> another DLINK as it looks like they can do the bridging plus give me N into
> my office network as well. The Cisco router needs to go one of these days
> as it’s loud and sucking power but it hasn’t yet become a priority after 2
> years of me complaining that it’s loud. I need throughput on the router as
> my lab environment is on a separate VLAN so that passes through the router.
> *
>
> * *
>
> *I tend to just spend the extra money on the low-end (or older mid-range)
> commercial gear as while I absolutely hate having to play SysAdmin at home,
> on the odd occasion that I have a need to do something strange, the
> capability is there. For example I had to mess with some multicast settings
> to get the media center extender working when I got it. Likewise my VOIP
> company was recently alleging that my phone issues were my fault and I
> mirrored the phone’s port off the switch and produced a trace proving
> otherwise. *
>
> * *
>
> *I will caution that the flipside of buying commercial wireless gear in
> particular requires that you have some semblance of a clue about WiFi and
> RF and so forth. Mine is really limited to what I read on Wikipedia,
> ownership of a full roll of tin foil, and the occasional favor from someone
> who actually understands this stuff. I’ve had some challenges getting my
> WiFi to work correctly and perform, especially in a dense urban residential
> neighborhood where everybody and their brother has some form of Linksys
> wifi broadcasting.*
>
> * *
>
> *Finally, I also invested some money on a couple APC UPS’ (~$175/ea
> range) that can sustain everything for more than 2 or 3 minutes and that
> have little LCD readouts on them that show load and power info. Even living
> in a major city, the power gets a little screwy sometimes, especially
> during summer storms (this weekend in fact). It doesn‘t always go out but
> it gets dirty enough to get out of the tolerances on the UPS’. *
>
> * *
>
> * *
>
> *Thanks,*
>
> *Brian Desmond*
>
> *[email protected]*
>
> * *
>
> *w – 312.625.1438 | c   – 312.731.3132*
>
> * *
>
> *From:* Webster [mailto:[email protected]]
> *Sent:* Tuesday, April 17, 2012 6:06 PM
>
> *To:* NT System Admin Issues
> *Subject:* RE: Wireless controller for 2 APs?****
>
>  ** **
>
> Brian,****
>
> ** **
>
> What wireless router do you have this matched up with?  I have a Linksys
> E3200 and haven’t found anything yet (from OfficeMax [for easy returns])
> that works with it.****
>
> ** **
>
> Thanks****
>
> ** **
>
> ** **
>
> Carl Webster****
>
> Consultant and Citrix Technology Professional****
>
> http://www.CarlWebster.com <http://www.carlwebster.com/>****
>
> ** **
>
> *From:* Brian Desmond [mailto:[email protected]<[email protected]>]
>
> *Subject:* RE: Wireless controller for 2 APs?****
>
> ** **
>
> *btw the reason I picked that one over other competing or cheaper models
> is that the Ethernet port on it is GigE. Many of these N-band APs have
> 100meg ports and I wanted to make sure that I could push >100mbps over the
> air down to the switch it’s plugged into. *
>
> * *
>
> * *
>
> *From:* Brian Desmond [mailto:[email protected]]
> *Subject:* RE: Wireless controller for 2 APs?****
>
> ** **
>
> *I picked one of these up - 
> **http://www.dlink.com/products/?pid=DAP-2553*<http://www.dlink.com/products/?pid=DAP-2553>
> *. Seems featureful, works well (so far), and was reasonably easy to
> configure. Make sure you flash the firmware as there’s a bunch of new
> functionality. *
>
> * *
>
> *Thanks,*
>
> *Brian Desmond*
>
> *[email protected]*
>
> * *
>
> *w – 312.625.1438 | c   – 312.731.3132*
>
> * *
>
> *From:* Kevin Lundy [mailto:[email protected] <[email protected]>]
> *Subject:* Re: Wireless controller for 2 APs?****
>
> ** **
>
> Brian - which D-Link model?  I'm in the market for a new AP.****
>
> On Tue, Apr 17, 2012 at 2:25 PM, Brian Desmond <[email protected]>
> wrote:****
>
> Sounds overkill. I just bought a D-Link WAP for my house a couple weeks
> ago that's out of their SMB type line and it even has a little basic
> wireless controller function built into it. Got it for perhaps 120 bucks on
> Amazon.****
>
>
>

~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to [email protected]
with the body: unsubscribe ntsysadmin

Reply via email to