We had it on 10/100, and were doing like 8fps and were dropping thousands of frames. At that point we tried dropping to 4fps and still were having camera timeouts and frame drops. Once we dropped a gig switch in, all went away.
Joe On Wed, Feb 20, 2008 at 1:16 PM, Joseph L. Casale <[EMAIL PROTECTED]> wrote: > Each camera needs a gig port? Are you sure? > jlc > > > > *From:* Joe Fox [mailto:[EMAIL PROTECTED] > *Sent:* Wednesday, February 20, 2008 9:35 AM > *To:* NT System Admin Issues > *Subject:* Re: Axis IP Cameras and Software > > > > One thing to keep in mind - if you have a lot of cameras and a decent > frame rate, you are going to need a ton of disk space. > > In order to accomodate the storage we have, we had to drop the frame rate > to 4fps for a facility with 36 cameras. We use about a 1TB for a 30 day > archive, and approximately 16GB daily. This isn't taking into account any > overlap between the daily storage and the archiving. Additionally, these > products are bandwidth hogs, so you'll need to put them and the server on a > gigabit ethernet switch. > > Just something to keep in mind. > > Joe > > On Wed, Feb 20, 2008 at 9:18 AM, Tom Cass <[EMAIL PROTECTED]> wrote: > > Most of the axis software will install as 30 day trial versions. > > > ------------------------------ > > *From:* Joseph L. Casale [mailto:[EMAIL PROTECTED] > > *Sent:* Tuesday, February 19, 2008 5:20 PM > *To:* NT System Admin Issues > *Subject:* Axis IP Cameras and Software > > > > Anyone know what the software for these cameras is like? > I need to roll out another setup and I don't want to use the stuff I have > in the past, I am hoping for something a little more enterprisable then what > I have (Aver). > > > > Something that supports event management and logging with remote > notifications would be good. > > > > Thanks! > jlc > > > > > > > > > -- > Joe Fox > Systems/Network Administrator > > Mobile# (716) 846-9308 > http://www.linkedin.com/in/josephfoxjr > > The information contained in this e-mail message, including any attached > files, is intended only for the personal and confidential use of the > recipient(s) named above. If you are not the intended recipient be advised > that any unauthorized use, disclosure, copying, distribution or the taking > of any action in reliance on the contents of this information is strictly > prohibited. If you have received this email in error, please immediately > notify the sender via telephone at 716-846-9308 or by return e-mail. > > -- Joe Fox Systems/Network Administrator Mobile# (716) 846-9308 http://www.linkedin.com/in/josephfoxjr The information contained in this e-mail message, including any attached files, is intended only for the personal and confidential use of the recipient(s) named above. If you are not the intended recipient be advised that any unauthorized use, disclosure, copying, distribution or the taking of any action in reliance on the contents of this information is strictly prohibited. If you have received this email in error, please immediately notify the sender via telephone at 716-846-9308 or by return e-mail. ~ Upgrade to Next Generation Antispam/Antivirus with Ninja! ~ ~ <http://www.sunbelt-software.com/SunbeltMessagingNinja.cfm> ~
