Well that would have been the solution to the problem if Networker wasn't screaming that my licenses are invalid. Probably has something to do with how our EMC Licensing was screwed up because they had our new office that we moved to listed as a different company.
Joe On Mon, Jun 2, 2008 at 3:09 PM, Kevin Lundy <[EMAIL PROTECTED]> wrote: > Again, it's been quite a while since we set ours up, so YMMV. However, > that sounds familiar so you may be onto the solution. I wish I had been > able to remember that last week for you. > > > On Mon, Jun 2, 2008 at 3:01 PM, Joe Fox <[EMAIL PROTECTED]> wrote: > >> Actually, we think we found the problem. The library has it's "Configured >> Slots" under the Partition setup set to "Default" which only gives the 2 >> "Universal" slots that are used for loading the tapes into the drives. >> >> After my backup finishes, I'm going to switch that setting to the number >> of slots that my hardware is licensed for, reboot the library and see if >> Networker likes it then. >> >> Thanks for all the help. >> >> Joe >> >> >> On Mon, Jun 2, 2008 at 12:36 PM, <[EMAIL PROTECTED]> wrote: >> >>> >>> "Joe Fox" <[EMAIL PROTECTED]> wrote on 05/30/2008 02:02:55 PM: >>> >>> > Just an update on this problem. I did an update on the Unknown >>> > Media Changer in the Device Manager, and had it go out to the >>> > internet to find a driver. It now reports back as a Quantum PX500 >>> > Series Media Changer, but still is only seen with two slots in EMC >>> > Networker. I was going to try and upgrade the EMC software this >>> > afternoon, but my boss wants to leave that as a last resort. >>> >>> >>> You should check with the NetWorker list <[EMAIL PROTECTED]>, >>> or just call EMC. >>> >>> > >>> > Thanks >>> > Joe >>> >>> > On Fri, May 30, 2008 at 1:10 AM, Steve Kistenmacher < >>> > [EMAIL PROTECTED]> wrote: >>> > Had a similar problem with quantum superloader the unknown media >>> > changer with MS driver is the way it should show up, problem we had >>> > was software EMC power path the backup software (BE12 uses its own >>> > drivers for tape drive) wasn't able to access the device to create >>> > the needed robotic library. >>> > >>> > From: Joe Fox [mailto:[EMAIL PROTECTED] >>> > Sent: Thursday, May 29, 2008 11:18 PM >>> > To: NT System Admin Issues >>> > Subject: Networker and Quantum Scalar Problem >>> > >>> > >>> > >>> > No virus found in this incoming message. Checked by AVG. Version: 8. >>> > 0.100 / Virus Database: 269.24.4/1473 - Release Date: 5/29/2008 7:53 PM >>> > >>> > >>> > >>> > -- >>> > Joe Fox >>> > Systems/Network Administrator >>> > >>> > Mobile# (716) 846-9308 >>> > http://www.linkedin.com/in/josephfoxjr >>> > >>> > The information contained in this e-mail message, including any >>> > attached files, is intended only for the personal and confidential >>> > use of the recipient(s) named above. If you are not the intended >>> > recipient be advised that any unauthorized use, disclosure, copying, >>> > distribution or the taking of any action in reliance on the contents >>> > of this information is strictly prohibited. If you have received >>> > this email in error, please immediately notify the sender via >>> > telephone at 716-846-9308 or by return e-mail. >>> >>> >> >> >> -- >> Joe Fox >> Systems/Network Administrator >> >> Mobile# (716) 846-9308 >> http://www.linkedin.com/in/josephfoxjr >> >> The information contained in this e-mail message, including any attached >> files, is intended only for the personal and confidential use of the >> recipient(s) named above. If you are not the intended recipient be advised >> that any unauthorized use, disclosure, copying, distribution or the taking >> of any action in reliance on the contents of this information is strictly >> prohibited. If you have received this email in error, please immediately >> notify the sender via telephone at 716-846-9308 or by return e-mail. >> >> > -- Joe Fox Systems/Network Administrator Mobile# (716) 846-9308 http://www.linkedin.com/in/josephfoxjr The information contained in this e-mail message, including any attached files, is intended only for the personal and confidential use of the recipient(s) named above. If you are not the intended recipient be advised that any unauthorized use, disclosure, copying, distribution or the taking of any action in reliance on the contents of this information is strictly prohibited. If you have received this email in error, please immediately notify the sender via telephone at 716-846-9308 or by return e-mail. ~ Upgrade to Next Generation Antispam/Antivirus with Ninja! ~ ~ <http://www.sunbelt-software.com/SunbeltMessagingNinja.cfm> ~
