Happen to remember which firmware you were on? and which one you went
to?
We're on 12.3(7)JA currently.
*******************************
John C. Kelsey
DuBois Regional Medical Center
(: 814.375.3073
*: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
*******************************
-----Original Message-----
From: David W. McSpadden [mailto:[EMAIL PROTECTED]
Sent: Tuesday, August 12, 2008 09:29
To: NT System Admin Issues
Subject: Re: AP Recommendation
I had some like that and a firmware or IOS update fixed them.
----- Original Message -----
From: Kelsey, John <mailto:[EMAIL PROTECTED]>
To: NT System Admin Issues
<mailto:[email protected]>
Sent: Tuesday, August 12, 2008 9:21 AM
Subject: RE: AP Recommendation
I've got about 100 of them, and recently they all go
offline at the same time and have to manually be power cycled to bring
them back. TAC is stumped. =(
*******************************
John C. Kelsey
DuBois Regional Medical Center
(: 814.375.3073
*: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
*******************************
-----Original Message-----
From: Andy Shook
[mailto:[EMAIL PROTECTED]
Sent: Friday, July 25, 2008 12:58
To: NT System Admin Issues
Subject: RE: AP Recommendation
+1 I've got six of them and haven't touched
them since install.
Shook
________________________________
From: N Parr [mailto:[EMAIL PROTECTED]
Sent: Friday, July 25, 2008 12:44 PM
To: NT System Admin Issues
Subject: RE: AP Recommendation
Most of my Cisco 1200's haven't been rebooted in
over 2 years.
________________________________
From: Mark Boersma
[mailto:[EMAIL PROTECTED]
Sent: Friday, July 25, 2008 11:23 AM
To: NT System Admin Issues
Subject: AP Recommendation
Hello all. I am looking for opinions on 802.11N
ap's.
I am currently running 6 Linksys WAP4400N ap's
and am quite disgruntled with them. If more than a few clients are
associated with them then they tend to disconnect and power cycle
themselves. The Linksys folks can't even speak English much less solve
the issue.
I am looking at either the 3Com 9550 or the
Cisco 1250 series.
I would probably run 4 of them and I don't
necessarily need them to be managed, I can run them as standalone. At
most there may be 15-20 clients associated with each AP, usually
probably 5-10.
Any input is appreciated in terms of:
-should I just bite the bullet and buy the $800
cisco's
-have I missed any that are worth looking at
Thanks,
Mark
-------------------------------------------------
Two rules to success in life:
1. Never tell people everything you know.
Mark Boersma
IT Manager
Triangle Associates, Inc.
[EMAIL PROTECTED]
________________________________
Please consider the environment before printing
this email.
________________________________
CONFIDENTIALITY NOTICE: This e-mail message,
including any attachments, is for the sole use of the intended
recipients(s) and may contain confidential and privileged information.
Any unauthorized review, use, disclosure or distribution is prohibited.
If you are not the intended recipient, please contact the sender by
reply e-mail and destroy all copies of the original message.
______________________________________________________
This e-mail and any files transmitted with it are
property of Indiana Members Credit Union, are confidential, and are
intended solely for the use of the individual or entity to whom this
e-mail is addressed. If you are not one of the named recipient(s) or
otherwise have reason to believe that you have received this message in
error, please notify the sender and delete this message immediately from
your computer. Any other use, retention, dissemination, forwarding,
printing, or copying of this email is strictly prohibited.
This email has been scanned by the MessageLabs Email
Security System.
For more information please visit
http://www.messagelabs.com/email
______________________________________________________________________
~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~
