They were installed from a Cisco WLSE appliance v2.13
 
 
*******************************
John C. Kelsey
DuBois Regional Medical Center
(:  814.375.3073  
*:   [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>  
*******************************

        -----Original Message-----
        From: Chyka, Robert [mailto:[EMAIL PROTECTED] 
        Sent: Tuesday, August 12, 2008 09:38
        To: NT System Admin Issues
        Subject: RE: AP Recommendation
        
        

        Do you have them installed with a WAP Controller?

         

        
________________________________


        From: Kelsey, John [mailto:[EMAIL PROTECTED] 
        Sent: Tuesday, August 12, 2008 9:21 AM
        To: NT System Admin Issues
        Subject: RE: AP Recommendation

         

        I've got about 100 of them, and recently they all go offline at
the same time and have to manually be power cycled to bring them back.
TAC is stumped.  =(

         

         

        *******************************
        John C. Kelsey
        DuBois Regional Medical Center
        *:  814.375.3073  
        *:   [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>  
        *******************************

                -----Original Message-----
                From: Andy Shook [mailto:[EMAIL PROTECTED]

                Sent: Friday, July 25, 2008 12:58
                To: NT System Admin Issues
                Subject: RE: AP Recommendation

                +1  I've got six of them and haven't touched them since
install.  

                 

                Shook

                 

                
                
________________________________


                From: N Parr [mailto:[EMAIL PROTECTED] 
                Sent: Friday, July 25, 2008 12:44 PM
                To: NT System Admin Issues
                Subject: RE: AP Recommendation

                 

                Most of my Cisco 1200's haven't been rebooted in over 2
years.

                 

                
                
________________________________


                From: Mark Boersma [mailto:[EMAIL PROTECTED] 
                Sent: Friday, July 25, 2008 11:23 AM
                To: NT System Admin Issues
                Subject: AP Recommendation

                Hello all.  I am looking for opinions on 802.11N ap's. 

                 

                I am currently running 6 Linksys WAP4400N ap's and am
quite disgruntled with them.  If more than a few clients are associated
with them then they tend to disconnect and power cycle themselves.  The
Linksys folks can't even speak English much less solve the issue.

                 

                I am looking at either the 3Com 9550 or the Cisco 1250
series.  

                 

                I would probably run 4 of them and I don't necessarily
need them to be managed, I can run them as standalone.  At most there
may be 15-20 clients associated with each AP, usually probably 5-10.

                 

                Any input is appreciated in terms of:

                -should I just bite the bullet and buy the $800 cisco's

                -have I missed any that are worth looking at

                 

                Thanks,

                 

                Mark

                -------------------------------------------------

                Two rules to success in life:

                1. Never tell people everything you know.

                 

                Mark Boersma

                IT Manager

                Triangle Associates, Inc.

                [EMAIL PROTECTED]

                 

                 

                
                
________________________________


                Please consider the environment before printing this
email.
                ________________________________
                
                CONFIDENTIALITY NOTICE: This e-mail message, including
any attachments, is for the sole use of the intended recipients(s) and
may contain confidential and privileged information. Any unauthorized
review, use, disclosure or distribution is prohibited. If you are not
the intended recipient, please contact the sender by reply e-mail and
destroy all copies of the original message. 

                 

                 
                 
                 
                 

                 

                 

                 

                 
                 
                 

         

         

         


         

        
         

        


~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

Reply via email to