Alright, I was wrong i do have "&CC_0106" included but looking at the sysprep def. turned a light bulb on. The drivers dell has for downloads do NOT work. You have to get them from Intel. Yes i was stuck on that too which is why i commented it in the sysprep file..
I am using this version for the E6400 ; ** Filename: iaStor.INF ; ** Revision: Version 8.6.0.1007 ; ** Date: 09/12/2008 ; ** Abstract: Windows* INF File for Intel(R) Matrix Storage Manager Driver -------------------------------------------------------------------------------------------------------------------- ; ** Filename: iaAHCI.INF ; ** Revision: Version 8.6.0.1007 ; ** Date: 09/12/2008 ; ** Abstract: Windows* INF File for Intel(R) Matrix Storage Manager Driver --------------------------------------------------------------------------------------------------------------------- Sysprep file ;Dell E6400 ;Get drivers from Intel not Dell *PNP0600.DeviceDesc=C:\Drivers\storage\E6400\iaAHCI.inf PCI\VEN_8086&DEV_2681&CC_0106=C:\Drivers\storage\E6400\iaAHCI.inf PCI\VEN_8086&DEV_27C1&CC_0106=C:\Drivers\storage\E6400\iaAHCI.inf PCI\VEN_8086&DEV_27C5&CC_0106=C:\Drivers\storage\E6400\iaAHCI.inf PCI\VEN_8086&DEV_2821&CC_0106=C:\Drivers\storage\E6400\iaAHCI.inf PCI\VEN_8086&DEV_2829&CC_0106=C:\Drivers\storage\E6400\iaAHCI.inf PCI\VEN_8086&DEV_2922&CC_0106=C:\Drivers\storage\E6400\iaAHCI.inf PCI\VEN_8086&DEV_2929&CC_0106=C:\Drivers\storage\E6400\iaAHCI.inf PCI\VEN_8086&DEV_3A02&CC_0106=C:\Drivers\storage\E6400\iaAHCI.inf PCI\VEN_8086&DEV_3A22&CC_0106=C:\Drivers\storage\E6400\iaAHCI.inf PCI\VEN_8086&DEV_2682&CC_0104=C:\Drivers\storage\E6400\iaStor.inf PCI\VEN_8086&DEV_27C3&CC_0104=C:\Drivers\storage\E6400\iaStor.inf PCI\VEN_8086&DEV_27C6&CC_0104=C:\Drivers\storage\E6400\iaStor.inf PCI\VEN_8086&DEV_2822&CC_0104=C:\Drivers\storage\E6400\iaStor.inf PCI\VEN_8086&DEV_282A&CC_0104=C:\Drivers\storage\E6400\iaStor.inf ;END Dell E6400 FYI... XP SP3 changes the way it handles the account being sysprep under. If you are like us and use the admin account and expect that to be copyied over to your default profile during sysprep then you have to add "UpdateServerProfiledirectory=1" into the [Unattended] section. Bob ------------------------------------------------------------------------------------------------------------------------ On Tue, Dec 30, 2008 at 4:29 PM, Phil Brutsche <[email protected]> wrote: > On my machines the non-AHCI SATA would not work if I didn't put in the > &CC_0106 at the end of the PCI ID. > > To be on the safe side I ALWAYS put the device IDs in sysprep.inf > EXACTLY the way they were in the driver .inf. > > I see I'm not the only one to suspect that putting > "BuildMassStorageSection = YES" in there will override your custom > SysprepMassStorage section ;) > > Johonn2 wrote: > > I finished my sysprep for both the E6400 AHCI and IRRT and the Dell > > OP760 series late last month. I believe you need to drop the "&CC_0106" > > on it but I would have to look at mine to know for sure. I am not in > > the office today so if someone else does not help out by then, then I > > will post it tomorrow. Also I may be wrong again but > > "BuildMassStorageSection = YES" I believe will overwrite your custom > > [SysprepMassStorage]. > > -- > > Phil Brutsche > [email protected] > > > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ > ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ > ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~
