Having just been through this exercise, my thoughts are that unless you
have very distinct needs, most products will do what you want them do
(SAN vs. NAS fundamentals aside).

 

Do look at the licensing, and do look at the expansion options.
Equallogic and Lefthand do require you to buy "nodes", however they
don't require you to buy licenses, whilst, say, EMC or Netapp will allow
you to buy shelves and add disks, but the licenses are mostly additional
extras which very quickly add up - EMC or Netapp would counter that with
Equallogic or Lefthand you're paying for licenses every time you add
capacity, and there's an element of truth in that I guess.

 

One thing that I personally liked with the P4000 solution is their VSA,
it means if I want to provision 10tb of cheap unimportant space I can do
so on anything that will run ESX/ESXi, I don't have to buy expensive
cabinets/shelves just to store 5 year old stuff that people still access
occasionally.

 

From: [email protected] [mailto:[email protected]] 
Sent: 19 November 2010 16:06
To: NT System Admin Issues
Subject: RE: First Steps into the SAN Arena

 

Thanks Sean and everyone else, I had an offsite meeting I had to go to
right after posting my question so sorry for the delay in getting back
to you.

 

The depth of questions you guys are offering shows there's a bunch I
don't yet understand so my answers may not be as coherent as you
deserve.

 

I've looked at Equalogic, Netapp, Lefthand and EMC.  From the IT folks
in our AEC Engineering industry who shared their setups, all had good
experience with these vendors.  Different people just had different
preferences to different capabilities so that's why I thought I should
run it by this group.

 

They all seemed to be able to perform the necessary shared storage
functionality just in different ways.

Most vendors like the Equalogic, required you to buy fully populated
shelves even though you may not need that much space which added cost.
The flexibility of the snapshots with EMC "seemed", to my inexperienced
eyes, to be more robust that others in that you could, among other
things, restore a snapshot without losing all the other snapshots, mount
snapshots as drives, etc.  How much value this truly has over time I
don't know but it seemed more flexible.  I also like the ability for the
system to automatically move data to slower or faster drives as needed.

 

We have a lot of runaway users so we rely on quotas to keep users from
adding 10 GB a day of crap and quotas have worked out well in this
regard.  As such, it's my understanding that I need to go with the NAS
functionality to support Windows quotas and AD permissions.  I'm told
that the NAS functionality of the array provides the ability to present
CIFS shares (and NFS) to our users.

 

Obviously, having never had a SAN, there's a bunch I don't understand or
even know to ask but every vendor seems able to do the job.
Technically, they all seem to meet our needs and I can point to several
companies in my industry who uses each of these vendors so choosing the
"best" one is daunting!  I definitely like the US tech support, the 4
hours onsite support etc, future expandability, etc.

 

We have about 24 TB of data but a lot of it is online archive data that
we must keep online.

 

Jim

 

 

 

 

 

From: Sean Martin [mailto:[email protected]] 
Sent: Thursday, November 18, 2010 3:58 PM
To: NT System Admin Issues
Subject: Re: First Steps into the SAN Arena

 

If you're looking at the NS line I would definitely talk to Dell about
Equalogics. 


Are you planning on utilizing the CIFS or NFS features? If not, look at
the CX4 line as they support iSCSI and Fiber Channel. I agree with
Anders that the Celerra interface is not the most intuitive and is
overly complex. However, I believe they're moving from Navisphere and
Celerra to Unisphere which combines both interfaces into one that can
manage all of the Clariions. There's apparently a lot of integration
with Unisphere and VSphere. Haven't had a chance to play with it yet. I
was in the planning stages of upgrading our CX4-960 to FLARE 30
(required to upgrade to Unisphere) but apparently there's a couple of
critical issues so EMC is recommending we hold off until the hotfixes
are released sometime in December.

 

- Sean

On Thu, Nov 18, 2010 at 2:21 PM, Anders Blomgren <[email protected]>
wrote:

That behind that admitedly much improved gui the celerra is a complex
beast.

 

That quite a few more complex system changes require an EMC Technitian.

 

That being said, I do like our Celerra. And probably wont get another
one when our current one needs replacing. The celerra is clariion
storage and a file serving box which is unnecessarily complex for our
needs. I'll probably increase the storage for our vsphere cluster and
stand up a windows vm.

 

So it all depends on your actual needs, i.e. number of vsphere hosts and
nas clients.

 

Probably more than you asked for but i get the feeling that EMC is
targeting smb's with a product that they don't always have the resources
to manage.

 

-Anders


Sent from my iPhone


On 18 nov 2010, at 23:45, "[email protected]"
<[email protected]> wrote:

        Hello,

         

        I know there are many vendors and ways to skin the SAN gopher
but I'm leaning towards this basic system as it meets our specs:

         

        EMC NS-120 10GB/s Celerra System

        Dual Data Movers 

        Dual SPS

        NFS 

        CIFS

         

        Seems they're offering a pretty good price.

         

        I'm looking to virtualize with VMWare VSphere and think this SAN
backend will meet our needs.

         

        My question is, does anyone have any experience with EMC Celerra
systems or EMC in general?
        Would I be making a big mistake going with EMC or the Celerra
from a support or stability perspective?

         

        Being new to SAN's I don't have a lot of experience so are there
any gotcha's I should be looking for?  Any pieces of info EMC sales guys
frequent forget to offer up?

         

        Please feel free to render any advice one way or the other.

         

        Thanks

         

        Jim

         

        ~ Finally, powerful endpoint security that ISN'T a resource hog!
~
        ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~
        
        ---
        To manage subscriptions click here:
http://lyris.sunbelt-software.com/read/my_forums/
        or send an email to [email protected]
        with the body: unsubscribe ntsysadmin

~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

---
To manage subscriptions click here:
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to [email protected]
with the body: unsubscribe ntsysadmin

 

~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

---
To manage subscriptions click here:
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to [email protected]
with the body: unsubscribe ntsysadmin

~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

---
To manage subscriptions click here:
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to [email protected]
with the body: unsubscribe ntsysadmin


--
MIRA Ltd

Watling Street, Nuneaton, Warwickshire, CV10 0TU, England
Registered in England and Wales No. 402570
VAT Registration  GB 114 5409 96

The contents of this e-mail are confidential and are solely for the use of the 
intended recipient.  If you receive this e-mail in error, please delete it and 
notify us either by e-mail, telephone or fax.  You should not copy, forward or 
otherwise disclose the content of the e-mail as this is prohibited.

~ Finally, powerful endpoint security that ISN'T a resource hog! ~
~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/>  ~

---
To manage subscriptions click here: 
http://lyris.sunbelt-software.com/read/my_forums/
or send an email to [email protected]
with the body: unsubscribe ntsysadmin

Reply via email to