On Mon, Jan 24, 2011 at 11:58 AM, Steve Ens <[email protected]> wrote: > I have a Procurve 2910, which is layer three, and I > couldn't find anything in the webgui that would allow this.
The web GUI in ProCurve stuff usually doesn't cover everything. You have to go to the CLI for more advanced stuff. I've never used a 2910, but the docs say it's a full layer 3 switch, so it should certainly be able to forward IP datagrams between broadcast domains/VLANs. I believe it uses one big router for all ports and VLANs, so it's just a matter of configuring IP addresses on the appropriate VLANs, and then adding any additional routes as needed. As others have said, layer 3 features can vary by brand, model, firmware version, license, etc. Going back to your OP: On Mon, Jan 24, 2011 at 11:42 AM, Steve Ens <[email protected]> wrote: > I've not much experience with Cisco gear, but is it possible to route two > different subnets on a Cisco 2950 switch? I want to keep my two networks > separate (mostly), but need specific port access between the two. Please explain "subnet" and "port" in the above. By subnet, do you also mean broadcast domain/VLAN, or is this two IP subnets in the same broadcast domain/VLAN? By "port", do you mean switch port or TCP port or UDP port or ...? It will prolly help if you explain what you're trying to do. :) Ideally, explain the VLAN and IP topologies involved, what you want forwarded, and what you don't want forwarded. -- Ben ~ Finally, powerful endpoint security that ISN'T a resource hog! ~ ~ <http://www.sunbeltsoftware.com/Business/VIPRE-Enterprise/> ~ --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to [email protected] with the body: unsubscribe ntsysadmin
