On 18/Aug/2007, Grant wrote:
> I changed my XF86Config-4 file so it was the same as the one posted
> on the thread, and I'm getting different errors now.
>
> I had configured am additional mouse incorrectly and deleted it.
> Now the error is that X can't find any screens.
>
>
Hi Grant
You should be getting close now. Look at the section in
XFree86Config that defines the "screen". Make sure the resolution is
set to "800 x 600" (the powerbooks native resolution) chances are the
resolution is set to '640 x 480' and/or '832 x 624'. You should also
check the "depth" - set this to "8" (that is 256 colors -we know the
powerbook supports that). Later, after X is working, you can change
the setting to support a higher color depth.
If these settings were already correct or after fixing them you get a
different error post the results.
-Dan
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
Nubus-pmac-users mailing list
Nubus-pmac-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/nubus-pmac-users
