On 3/10/21 12:24 PM, Johnson-shen wrote:
Dear Wolfy,
Please refer to the below table for the whole support list of the UPS
Model of the new driver.
Please kindly advise me if you have any questions.
Regards!
Johnson
Well, I am curious, what does the new driver add ? Currently I am using
blazer_ser ( the UPS is connected to a RPI via a USB-RS232 adapter ). I
assume based on the table above that the driver targets only UPS models
newer than mine ?
Here is the full output from my UPS:
[wolfy@wolfy ~]$ upsc ablerex@pi
battery.charge: 100
battery.voltage: 108.48
battery.voltage.high: 104.00
battery.voltage.low: 83.20
battery.voltage.nominal: 96.0
device.mfr: Ablerex
device.model: MS3000RT
device.type: ups
driver.name: blazer_ser
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/ttyUSB0
driver.parameter.synchronous: no
driver.version: 2.7.4
driver.version.internal: 1.57
input.current.nominal: 14.0
input.frequency: 50.0
input.frequency.nominal: 50
input.voltage: 230.6
input.voltage.fault: 190.0
input.voltage.nominal: 220
output.voltage: 220.0
ups.beeper.status: disabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: MS02035C
ups.load: 43
ups.mfr: Ablerex
ups.model: MS3000RT
ups.status: OL
ups.temperature: 42.7
ups.type: online
_______________________________________________
Nut-upsdev mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsdev
