Hello Jim!

There is no problem - as you mentioned: the data is reported. I just wanted to let you know, for the record, besides - NUT made me do it ;) The only thing I noticed is that in case of PSI5-1500RT120 NUT (v2.7.4) doesn't report the ups.load value, do you know if this has been added in the newer wesion?

Regards,
------------------------------------------------------------------------
IRENEUSZ GRYCUK
CEO & Software Architect
Mobile: +48 692 786 248 <tel:+48692786248>
E-Mail: [email protected]
www.wiredbit.com <https://www.wiredbit.com>
Confidentiality Notice: This email and its attachments (if any) contain confidential information of the sender. The information is intended only for the use by the direct addressees of the original sender of this email. If you are not an intended recipient of the original sender (or responsible for delivering the message to such person), you are hereby notified that any review, disclosure, copying, distribution or the taking of any action in reliance of the contents of and attachments to this email is strictly prohibited. If you have received this email in error, please immediately notify the sender at the address shown herein and permanently delete any copies of this email (digital or paper) in your possession.

On 12/30/22 21:49, Jim Klimov wrote:
Thanks for the HCL report.

Is the "problem" is "no OID found, tell devs"? - it is a benign message (muted in modern NUT - 2.7.4 is quite old) meaning that a subdriver match happened differently (per evidence - data is reported).

Jim


On Fri, Dec 30, 2022, 17:25 Ireneusz Grycuk <[email protected]> wrote:

    Hello NUT dev!

    Reporting problem with NUT controller connected via SNMP v1 to
    Vertiv PSI5-1500RT120 UPS:


    Network UPS Tools - UPS driver controller 2.7.4
    Network UPS Tools - Generic SNMP UPS driver 0.97 (2.7.4)
    No matching MIB found for sysOID '.1.3.6.1.4.1.476.1.42'!
    Please report it to NUT developers, with an 'upsc' output for your
    device.
    Going back to the classic MIB detection method.
    Detected PSI5-1500RT120 on host 10.1.1.32 (mib: ietf 1.5)

    $ upsc UPS01
    Init SSL without certificate database
    battery.charge: 100.00
    battery.runtime: 1260.00
    battery.runtime.low: 120.00
    battery.voltage: 54.00
    device.mfr: Vertiv
    device.model: PSI5-1500RT120
    device.type: ups
    driver.name <http://driver.name>: snmp-ups
    driver.parameter.pollfreq: 15
    driver.parameter.pollinterval: 2
    driver.parameter.port: 10.1.1.32
    driver.parameter.snmp_version: v1
    driver.parameter.synchronous: no
    driver.version: 2.7.4
    driver.version.data: ietf MIB 1.5
    driver.version.internal: 0.97
    input.current: 5.00
    input.frequency: 60.00
    input.frequency.nominal: 60.00
    input.phases: 1.00
    input.voltage: 115.00
    input.voltage.nominal: 120.00
    output.current: 4.40
    output.frequency: 60.00
    output.frequency.nominal: 60.00
    output.phases: 1.00
    output.power.nominal: 1500.00
    output.voltage: 115.00
    output.voltage.nominal: 120.00
    ups.beeper.status: enabled
    ups.firmware: 02418.03
    ups.firmware.aux: 8.2.0.0
    ups.mfr: Vertiv
    ups.model: PSI5-1500RT120
    ups.start.auto: yes
    ups.status: OL
    ups.test.result: done and passed
    ups.timer.reboot: 0
    ups.timer.shutdown: 0
    ups.timer.start: 0


    Regards,
-- ------------------------------------------------------------------------
    IRENEUSZ GRYCUK
    CEO & Software Architect
    Mobile: +48 692 786 248 <tel:+48692786248>
    E-Mail: [email protected]
    www.wiredbit.com <https://www.wiredbit.com>
    Confidentiality Notice: This email and its attachments (if any)
    contain confidential information of the sender. The information is
    intended only for the use by the direct addressees of the original
    sender of this email. If you are not an intended recipient of the
    original sender (or responsible for delivering the message to such
    person), you are hereby notified that any review, disclosure,
    copying, distribution or the taking of any action in reliance of
    the contents of and attachments to this email is strictly
    prohibited. If you have received this email in error, please
    immediately notify the sender at the address shown herein and
    permanently delete any copies of this email (digital or paper) in
    your possession.

    _______________________________________________
    Nut-upsdev mailing list
    [email protected]
    https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsdev

_______________________________________________
Nut-upsdev mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsdev

Reply via email to