Can't really say about ups.load without drilling into code diffs... may be faster to just build current git master branch and run the driver in data-dump mode:
git clone .../nut; cd nut ./ci_build.sh ./drivers/snmp-ups -s test -d1 -x port=UPSIP -x community=... and maybe fiddle with mibs parameter - your report used the IETF standard fallback, maybe we know a better featured vendor mib for the OEM under some custom OID tree... or read up on subdriver generation and contribute a new one or extend existing :) Jim On Fri, Dec 30, 2022, 23:13 Ireneusz Grycuk <[email protected]> wrote: > Hello Jim! > > There is no problem - as you mentioned: the data is reported. I just > wanted to let you know, for the record, besides - NUT made me do it ;) The > only thing I noticed is that in case of PSI5-1500RT120 NUT (v2.7.4) doesn't > report the ups.load value, do you know if this has been added in the newer > wesion? > > Regards, > ------------------------------ > IRENEUSZ GRYCUK > CEO & Software Architect > Mobile: +48 692 786 248 <+48692786248> > E-Mail: [email protected] > www.wiredbit.com > Confidentiality Notice: This email and its attachments (if any) contain > confidential information of the sender. The information is intended only > for the use by the direct addressees of the original sender of this email. > If you are not an intended recipient of the original sender (or responsible > for delivering the message to such person), you are hereby notified that > any review, disclosure, copying, distribution or the taking of any action > in reliance of the contents of and attachments to this email is strictly > prohibited. If you have received this email in error, please immediately > notify the sender at the address shown herein and permanently delete any > copies of this email (digital or paper) in your possession. > On 12/30/22 21:49, Jim Klimov wrote: > > Thanks for the HCL report. > > Is the "problem" is "no OID found, tell devs"? - it is a benign message > (muted in modern NUT - 2.7.4 is quite old) meaning that a subdriver match > happened differently (per evidence - data is reported). > > Jim > > > On Fri, Dec 30, 2022, 17:25 Ireneusz Grycuk <[email protected]> wrote: > >> Hello NUT dev! >> >> Reporting problem with NUT controller connected via SNMP v1 to Vertiv >> PSI5-1500RT120 UPS: >> >> >> Network UPS Tools - UPS driver controller 2.7.4 >> Network UPS Tools - Generic SNMP UPS driver 0.97 (2.7.4) >> No matching MIB found for sysOID '.1.3.6.1.4.1.476.1.42'! >> Please report it to NUT developers, with an 'upsc' output for your device. >> Going back to the classic MIB detection method. >> Detected PSI5-1500RT120 on host 10.1.1.32 (mib: ietf 1.5) >> >> $ upsc UPS01 >> Init SSL without certificate database >> battery.charge: 100.00 >> battery.runtime: 1260.00 >> battery.runtime.low: 120.00 >> battery.voltage: 54.00 >> device.mfr: Vertiv >> device.model: PSI5-1500RT120 >> device.type: ups >> driver.name: snmp-ups >> driver.parameter.pollfreq: 15 >> driver.parameter.pollinterval: 2 >> driver.parameter.port: 10.1.1.32 >> driver.parameter.snmp_version: v1 >> driver.parameter.synchronous: no >> driver.version: 2.7.4 >> driver.version.data: ietf MIB 1.5 >> driver.version.internal: 0.97 >> input.current: 5.00 >> input.frequency: 60.00 >> input.frequency.nominal: 60.00 >> input.phases: 1.00 >> input.voltage: 115.00 >> input.voltage.nominal: 120.00 >> output.current: 4.40 >> output.frequency: 60.00 >> output.frequency.nominal: 60.00 >> output.phases: 1.00 >> output.power.nominal: 1500.00 >> output.voltage: 115.00 >> output.voltage.nominal: 120.00 >> ups.beeper.status: enabled >> ups.firmware: 02418.03 >> ups.firmware.aux: 8.2.0.0 >> ups.mfr: Vertiv >> ups.model: PSI5-1500RT120 >> ups.start.auto: yes >> ups.status: OL >> ups.test.result: done and passed >> ups.timer.reboot: 0 >> ups.timer.shutdown: 0 >> ups.timer.start: 0 >> >> >> Regards, >> -- >> ------------------------------ >> IRENEUSZ GRYCUK >> CEO & Software Architect >> Mobile: +48 692 786 248 <+48692786248> >> E-Mail: [email protected] >> www.wiredbit.com >> Confidentiality Notice: This email and its attachments (if any) contain >> confidential information of the sender. The information is intended only >> for the use by the direct addressees of the original sender of this email. >> If you are not an intended recipient of the original sender (or responsible >> for delivering the message to such person), you are hereby notified that >> any review, disclosure, copying, distribution or the taking of any action >> in reliance of the contents of and attachments to this email is strictly >> prohibited. If you have received this email in error, please immediately >> notify the sender at the address shown herein and permanently delete any >> copies of this email (digital or paper) in your possession. >> _______________________________________________ >> Nut-upsdev mailing list >> [email protected] >> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsdev >> > >
_______________________________________________ Nut-upsdev mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsdev
