Thank you for the info. I'll update one of the Linux machines and see if it improves.
On Thu, Feb 16, 2023, at 1:01 AM, Jim Klimov wrote: > That is a message from NUT 2.7.4 and older, emitted as snmp-ups driver tries > to guess the vendor that matches a device (by extended sub-trees) or see if > it has to fall back to IETF data tree, if `mibs=...` were not specified. > > Current versions should not post that as a sort-of-drastic situation. > > Jim > > > On Thu, Feb 16, 2023, 02:16 Brad Tarver via Nut-upsdev > <[email protected]> wrote: >> Hello all, >> >> Thank you in advance for a great FOSS project. Also, thank you for reading >> my question. >> >> I have a CyberPower OR1500LCDRTXL2U with an RMCARD205. There are a handful >> of devices plugged into the UPS. >> >> I received a message today saying to send upsc output to NUT developers >> after this message: "No matching MIB found for sysOID >> '.1.3.6.1.4.1.3808.1.1.1'" >> >> root@delta:/etc/nut# systemctl status nut-driver.service >> Feb 15 17:47:52 delta upsdrvctl[519]: No matching MIB found for sysOID >> '.1.3.6.1.4.1.3808.1.1.1'! >> Feb 15 17:47:52 delta upsdrvctl[519]: Please report it to NUT developers, >> with an 'upsc' output for your device. >> Feb 15 17:47:52 delta upsdrvctl[519]: Going back to the classic MIB >> detection method. >> Feb 15 17:47:52 delta upsdrvctl[519]: Detected OR1500LCDRTXL2U on host >> 172.16.20.30 (mib: cyberpower 0.1) >> Feb 15 17:47:52 delta upsdrvctl[519]: [network-ups] unhandled ASN 0x5 >> received from .1.3.6.1.4.1.3808.1.1.1.2.2.2.0 >> Feb 15 17:47:52 delta snmp-ups[576]: Startup successful >> >> UPS.CONF >> ======== >> maxretry = 3 >> [network-ups] >> driver = snmp-ups >> port = 172.16.20.30 >> snmp_version = v2c >> community = cybernut >> pollfreq = 15 >> desc = "CyperPower OR1500LCDRTXL2U" >> >> >> UPSC OUTPUT >> ======== >> root@delta:/etc/nut# upsc network-ups@localhost >> Init SSL without certificate database >> battery.runtime: 262800.00 >> battery.runtime.elapsed: 0.00 >> device.mfr: CYBERPOWER >> device.model: OR1500LCDRTXL2U >> device.serial: REDACTED SERIAL NUMBER >> device.type: ups >> driver.name: snmp-ups >> driver.parameter.pollfreq: 15 >> driver.parameter.pollinterval: 2 >> driver.parameter.port: 172.16.20.30 >> driver.parameter.snmp_version: v2c >> driver.parameter.synchronous: no >> driver.version: 2.7.4 >> driver.version.data: cyberpower MIB 0.1 >> driver.version.internal: 0.97 >> ups.firmware: BF02018B7V11 >> ups.mfr: CYBERPOWER >> ups.model: OR1500LCDRTXL2U >> ups.serial: REDACTED SERIAL NUMBER >> ups.status: OL >> >> SNMPWALK >> ======== >> root@delta:/etc/nut# snmpwalk -c cybernut -v 2c 172.16.20.30 >>
_______________________________________________ Nut-upsdev mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsdev
