Citeren Fr3ddie <[email protected]>: > The only thing that's "strange" is that the driver report a 97.5% > battery charge status also if the UPS is at full charge (it's attached > to power network by several days without interruption), as you can see here:
[...] The reason for this (and what can be done about it) is documented in the man page (man 8 megatec). Look under the 'battvolts' parameter. > And more, my syslog daemon sometimes (rarely, luckily) report a "lost > connection with UPS" followed by a "reconnected" status, here's a few > log lines: > > Dec 22 15:09:00 <ServerName> upsd[5608]: Data for UPS [PowerMust600USB] > is stale - check driver > Dec 22 15:09:00 <ServerName> upsd[5608]: UPS [PowerMust600USB] data is > no longer stale > > the problem above happens, more or less, one time every 4 or 5 days of > NUT monitoring and it happens 5 or 6 times consecutively in half an > hour. Then, I can't see those log lines any more for another 4/5 days. > I don't know if it's a "normal" behaviour or not, so I wrote here, > mainly to report that NUT works with this new UPS, but also to signal > this strange behaviour :) This will be fixed by upgrading to nut-2.2.2 or later. Best regards, Arjen -- Please keep list traffic on the list _______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
