Hi Spiros!
Sorry I was very busy, but I have a little time now for test.
I attached my output, I looked it, I think it's right.
But I checked out tha last nut revision (rev 2454) and I used autoreconf
--install command and I gave the follow error msg:
configure.in:86: error: possibly undefined macro: AC_C_FLEXIBLE_ARRAY_MEMBER
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
configure.in:87: error: possibly undefined macro: AC_C_VARARRAYS
configure.in:97: error: possibly undefined macro: AC_TYPE_LONG_DOUBLE
configure.in:98: error: possibly undefined macro: AC_TYPE_LONG_LONG_INT
autoreconf: /usr/bin/autoconf failed with exit status: 1
What's wrong with this revision?
2010/5/7 Spiros Ioannou <[email protected]>
> Hello, I have no feedback on this and I'm affraid it was lost since I
> sent it as a reply to a thread.
> This is a big patch that I'm hoping will fix most of the issues.
> Mainly 3-phase support + easy multiplier customization per model on
> the driver.
>
> It is described here:
>
> http://lists.alioth.debian.org/pipermail/nut-upsdev/2010-April/004802.html
>
> Best Regards,
> -Spiros
>
> _______________________________________________
> Nut-upsdev mailing list
> [email protected]
> http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
>
--
Best Regards,
Robert
battery.current: 0.00
battery.runtime: 8280
battery.runtime.low: 120
battery.temperature: 0.0
battery.voltage: 549.0
battery.voltage.nominal: 552.0
device.mfr: Liebert
device.model: GXT2-1000RT230
device.serial: 0428100126AF041
device.type: ups
driver.name: liebert-esp2
driver.parameter.pollinterval: 2
driver.parameter.port: /dev/ttyS0
driver.version: 2.4.3-2435M
driver.version.internal: 0.02
input.bypass.current: 0.0
input.bypass.frequency: 50.0
input.bypass.voltage: 230.4
input.frequency: 50.0
input.frequency.nominal: 50.0
input.phases: 1
input.voltage: 230.4
output.current: 0.8
output.frequency: 50.0
output.frequency.nominal: 50.0
output.phases: 1
output.voltage: 230.4
ups.delay.start: 0
ups.firmware: GXT2MR15D
ups.load: 0
ups.mfr: Liebert
ups.mfr.date: 12OCT04
ups.model: GXT2-1000RT230
ups.power: 186
ups.power.nominal: 1000
ups.realpower: 111
ups.serial: 0428100126AF041
ups.status: OL
ups.temperature: 29.0
ups.type: online
_______________________________________________
Nut-upsdev mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
