Hi Arjen! I attached the wrong and correct output , please check it. The HEAD version liebert-esp2 driver give wrong output,but if you patch it with my patch it will be correct. In outputs.log focus on model,firmware,serial and mfr date values.
And I attached my patch earlier. 2010/7/6 Arjen de Korte <[email protected] <nut%[email protected]>> > Citeren Robert Jobbagy <[email protected]>: > > > I checked out the HEAD rev and tried the liebert driver. >> it gave wrong model,firmware,serial, mfr date value. caused by len >> variable >> in line 97 and after >> > > If you provide the debug output, this will save us looking up the last time > you posted the results. > > > I use my ups with usb -> serial converter. >> > > Which one? > > > these patches attached >> >> Did you try the liebert-esp2 driver in ON Battery mode ? >> > > I don't have one, so I can't tell. > > > Because If I switch my ups on battery (plugged off the input) then liebert >> driver force shutdown PC and shutdown UPS. >> > > In it's present state, the liebert-esp2 driver can't shutdown the UPS. > > > Battery is full charged. UPS doesnt recieve LOW BATTERY EVENT. >> > > How old are the batteries? When was the last time you ran a battery test? > This sounds more like a bad battery than a driver problem. Worn out > batteries are a common cause of mishaps like these, where the batteries seem > to be fine when not loaded (mains present), but fail under load (mains > failure) within seconds. > > > the shutdown function is missing from liebert-esp2 driver, this is the >> reason the force shutdown ? >> > > The driver won't be able to shutdown the UPS if the upsdrv_shutdown > function is not functional. If the UPS kills the output, it is not caused by > NUT but most likely by the battery protection. > > Best regards, Arjen > -- > Please keep list traffic on the list > > > _______________________________________________ > Nut-upsdev mailing list > [email protected] > http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev > -- Best Regards, Robert
wrong output: battery.charge: 100 battery.current: 0.00 battery.runtime: 59340 battery.temperature: 0.0 battery.voltage: 54.9 battery.voltage.nominal: 55.2 device.mfr: Liebert device.model: GXT2-1000RT230 device.serial: GXT device.type: ups driver.name: liebert-esp2 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyS0 driver.version: 2.4.3-2462M driver.version.internal: 0.02 input.bypass.voltage: 222.0 input.frequency: 50.0 input.frequency.nominal: 50.0 input.voltage: 223.4 output.current: 0.3 output.frequency: 50.0 output.voltage: 230.4 ups.firmware: ups.load: 0 ups.mfr: Liebert ups.mfr.date: 2MR1 ups.model: GXT2-1000RT230 ups.power: 0 ups.power.nominal: 1000 ups.realpower: 0 ups.serial: GXT ups.status: OL ups.temperature: 25.0 correct output: battery.charge: 100 battery.current: 0.00 battery.runtime: 59340 battery.temperature: 0.0 battery.voltage: 54.9 battery.voltage.nominal: 55.2 device.mfr: Liebert device.model: GXT2-1000RT230 device.serial: 0602700035AF041 device.type: ups driver.name: liebert-esp2 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/ttyS0 driver.version: 2.4.3-2462M driver.version.internal: 0.02 input.bypass.voltage: 222.0 input.frequency: 50.0 input.frequency.nominal: 50.0 input.voltage: 223.4 output.current: 0.3 output.frequency: 50.0 output.voltage: 230.4 ups.firmware: GXT2MR15D ups.load: 0 ups.mfr: Liebert ups.mfr.date: 24JAN06 ups.model: GXT2-1000RT230 ups.power: 0 ups.power.nominal: 1000 ups.realpower: 0 ups.serial: 0602700035AF041 ups.status: OL ups.temperature: 25.0
_______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
