Hi Grigory,
2010/8/25 Баталов Григорий <[email protected]>
> Hello!
>
> It looks like bcmxcp driver doesn't fit my device:
>
> UPS Model PW9125
> UPS Firmware Version FP: 1.10 INV: 1.10
> VA Rating 3000 VA
>
> Web/SNMP card is present.
>
> Minicom connection to /dev/ttyS0 gives nice banner and control menu,
> but they prevent nut driver from working correctly (I guess). UPS should
> be switched into "Pass-Through" mode before BCM/XCP commands
> became actual.
>
> How to deal with such UPS? Should I modify default bcmxcp driver or
> somehow turn device into supported mode?
>
the bcmxcp driver is for serial communication (like bcmxcp_usb is for USB).
here, you should be using snmp-ups, ie having in your ups.conf the
following:
[connectUPS]
driver = snmp-ups
port = <ip address of the connectUPS card>
this should answer your needs.
cheers,
Arnaud
--
Linux / Unix Expert R&D - Eaton - http://www.eaton.com/mgeops
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://www.debian.org
Free Software Developer - http://arnaud.quette.free.fr/
_______________________________________________
Nut-upsdev mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
