26 августа 2010 г. 12:11 пользователь Arnaud Quette <[email protected]> написал:
>> It looks like bcmxcp driver doesn't fit my device: >> >> UPS Model PW9125 >> UPS Firmware Version FP: 1.10 INV: 1.10 >> VA Rating 3000 VA >> >> Web/SNMP card is present. >> >> Minicom connection to /dev/ttyS0 gives nice banner and control menu, >> but they prevent nut driver from working correctly (I guess). UPS should >> be switched into "Pass-Through" mode before BCM/XCP commands >> became actual. >> >> How to deal with such UPS? Should I modify default bcmxcp driver or >> somehow turn device into supported mode? > > the bcmxcp driver is for serial communication (like bcmxcp_usb is for USB). > here, you should be using snmp-ups, ie having in your ups.conf the > following: > [connectUPS] > driver = snmp-ups > port = <ip address of the connectUPS card> > > this should answer your needs. Thank you, it works this way too, but I'd like to setup serial communication as well. Do you mean that SNMP card has unsupported serial port and bcmxcp driver is for standalone communication ports only (9 pins)? -- Grigory Batalov _______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev
