Charles,
the out from the command below as well as the system.log file
are below your email.
It does look like a permission issue but what one?
Thx
chris
On 2/5/14, 6:43 PM, Charles Lepple wrote:
On Feb 5, 2014, at 10:12 AM, Chris Duffy wrote:
However, we are using NUT 2.6.5.
Are we missing something by running 2.6.5 rather then
2.7.1? If so, I can build/install 2.7.1.
Well, 2.6.5 is from August 2012, so it's not the newest. And eventually, we
would like people to switch to the shiny new nutdrv_qx driver which is in
2.7.1. But I'm pretty much guessing here until I see the logs from starting up
the driver. For now, let's get the log messages from the 2.6.5 driver, and
figure out whether it's something that has definitely been fixed in later
versions, or if we need to go to something post-2.7.1 from Git.
Please run this:
/usr/local/libexec/nut/blazer_usb -a UPSonic -u root -D
and send the output back to the list.
Output from the above command:
0.000000 debug level is '1'
0.248714 Supported UPS detected with megatec protocol
1.268575 Permissions problem: Input/output error
Network UPS Tools - Megatec/Q1 protocol USB driver 0.09
(2.6.5-Unversioned directory)
/var/log/system.log entries but they do not come out as a result
of the above command....they just come out in large intervals:
Feb 6 12:09:15 smalltree upsmon[3091]: UPS [UPSonic@localhost]: connect
failed: Connection failure: Connection refused
--
Chris Duffy
Product Support
Small Tree Communications
www.small-tree.com
Direct 651-209-6509 X305
Mobil 651-303-9613
Skype:cjdwoodbury
Yahoo:chris_duffy6288
AIM/Google:[email protected]
_______________________________________________
Nut-upsdev mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
