This really isn’t what you want. You should use a normal shutdown command on Gentoo:
SHUTDOWNCMD "/sbin/shutdown -h +0” When you emerged the NUT package, you should have seen this message: * Please note that NUT now runs under the 'nut' user. * NUT is in the uucp group for access to RS-232 UPS. * However if you use a USB UPS you may need to look at the udev or * hotplug rules that are installed, and alter them suitably. * * You are strongly advised to read the UPGRADING file provided by upstream. * * Please note that upsdrv is NOT automatically started by upsd anymore. * If you have multiple UPS units, you can use their NUT names to * have a service per UPS: * ln -s /etc/init.d/upsdrv /etc/init.d/upsdrv.$UPSNAME * * If you want apcupsd to power off your UPS when it * shuts down your system in a power failure, you must * add nut.powerfail to your shutdown runlevel: * * rc-update add nut.powerfail shutdown The thing in particular to pay attention to is the last line. Denny > On Jul 27, 2018, at 19:14, [email protected] wrote: > > This is the shutdown command I am using in /etc/nut/upsmon.conf: > > SHUTDOWNCMD "/usr/sbin/upsdrvctl shutdown Eaton5SC1500 ; /sbin/shutdown > -h +0" > > The /etc/shutdown part works. The UPS name, Eaton5SC1500, is correct > because the command 'upsc Eaton5SC1500' lists the current parameters of > the ups. _______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
