I also operate an HP T1500 G3 which it's an Eaton made UPS. Connected on usb i get frequent communication errors and data aquisition stopped. Mine has a serial connection, also. Operating via serial has no trouble. Maybe it's something related to usb setting in bios, i.e. Legacy mode, speed setting, etc. However on serial mode looks like the eaton or hoe power protector software does not record any statistics...
On Tue, 12 Feb 2019, 11:24 <[email protected] wrote: > Zitat von [email protected]: > > Hello, > > > > we try to use Network UPS tools to monitor a network connected Eaton > > 93PS UPS. It basically works but we get frequent "Data is stale - > > check driver" warnings with a "data is no longer stale" shortly > > after in the log. We tried both snmp-ups and netxml-ups driver and > > both raise the same error. If have captured the communication > > between nut and UPS but all request/responses are way below a second. > > > > Any idea what is going wrong? > > > > NUT version used is from Ubuntu 18.04 repository (2.7.4) and Eaton > > Management Card is on latest firmware. > > > I found this issue around a year ago but it is related to USB not > network in this case. Any idea if there is something similar at the > network driver code? > > https://github.com/networkupstools/nut/issues/542 > > Regards > > Andreas > > > > _______________________________________________ > Nut-upsuser mailing list > [email protected] > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
