Zitat von [email protected]:
Zitat von nicolae788 <[email protected]>:
I also operate an HP T1500 G3 which it's an Eaton made UPS. Connected on
usb i get frequent communication errors and data aquisition stopped. Mine
has a serial connection, also. Operating via serial has no trouble. Maybe
it's something related to usb setting in bios, i.e. Legacy mode, speed
setting, etc.
However on serial mode looks like the eaton or hoe power protector software
does not record any statistics...
On serial mode a simpler protocol is used to my knowledge, so it
might be that statistics missing in this case. Your problem with USB
could be related to issue
https://github.com/networkupstools/nut/issues/542 and should be
fixed in the actual code, but we use network (netxml-ups or
snmp-ups) and also have "data stale" errors.
I hoped that someone could clarify if the USB issue mentioned is
also lurking in the network drivers.
Oh and there is also https://github.com/networkupstools/nut/issues/661
but this one is from yesterday.
Can someone comment what is the recommended way to monitor a Eaton UPS
with nut?
snmp-ups,netxml-ups or something other?
Regards
Andreas
_______________________________________________
Nut-upsuser mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
