On Wednesday 08 January 2020 08:15:01 Roger Price wrote: > On Wed, 8 Jan 2020, Gene Heskett wrote: > > On Wednesday 08 January 2020 06:44:03 Roger Price wrote: > >> I am surprised that there is no ups.delay.start for this UPS. > > > > My new APC Smart-UPS_1500 doesn't have it either. > > Hello Gene, The NUT 2.7.2 "device dump library" entry for the APC > Smart-UPS 1500 at > https://networkupstools.org/ddl/APC/Smart-UPS_1500.html shows an entry > for ups.delay.start, so could you submit the output of the commands > upsc <ups>, upsrw <ups> and upscmd -l <ups> to this list, so that the > current features of this UPS may be included. > > Roger UPSC myups: gene@coyote:/usr/src/nut-2.7.2/docs$ upsc myups Init SSL without certificate database battery.charge: 100 battery.charge.low: 10 battery.charge.warning: 50 battery.runtime: -1 battery.runtime.low: 150 battery.type: PbAc battery.voltage: 26.2 battery.voltage.nominal: 24.0 device.mfr: American Power Conversion device.model: Smart-UPS_1500 device.serial: 3S1906X11389 device.type: ups driver.name: usbhid-ups driver.parameter.offdelay: 120 driver.parameter.ondelay: 0 driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.synchronous: no driver.version: 2.7.4 driver.version.data: APC HID 0.96 driver.version.internal: 0.41 ups.beeper.status: enabled ups.delay.shutdown: 120 ups.firmware: UPS 03.5 / ID=1015 ups.mfr: American Power Conversion ups.mfr.date: 2019/02/06 ups.model: Smart-UPS_1500 ups.productid: 0003 ups.serial: 3S1906X11389 ups.status: OL ups.timer.reboot: -1 ups.timer.shutdown: 65535 ups.vendorid: 051d
upsrw myups: [battery.charge.low] Remaining battery level when UPS switches to LB (percent) Type: STRING Maximum length: 10 Value: 10 [battery.runtime.low] Remaining battery runtime when UPS switches to LB (seconds) Type: STRING Maximum length: 10 Value: 150 [ups.delay.shutdown] Interval to wait after shutdown with delay command (seconds) Type: STRING Maximum length: 10 Value: 120 upscmd -l myups: Instant commands supported on UPS [myups]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper beeper.off - Obsolete (use beeper.disable or beeper.mute) beeper.on - Obsolete (use beeper.enable) load.off - Turn off the load immediately load.off.delay - Turn off the load with a delay (seconds) shutdown.reboot - Shut down the load briefly while rebooting the UPS shutdown.stop - Stop a shutdown in progress Looks fairly simple, too simple IMNSHO. Thanks for asking Roger, I hope this helps. > _______________________________________________ > Nut-upsuser mailing list > [email protected] > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
