Hello I am using Freenas 11.3 (freebsd like) with a GREENCELL usb ups.
with nut 2.7.4_13 pre installed But, this ups is not detected as "blazer_usb" on port "auto" neither "ugen0.4"! Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Megatec/Q1 protocol USB driver 0.12 (2.7.4) No supported devices found. detail below. Another info : This driver "blazer_usb" and this UPS have no problem on a raspberry pi3. With the same configuration!! What I can do?? Thanks in advance DL usbconfig dump_devices_des ugen0.4: <MEC MEC0003> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0008 idVendor = 0x0001 idProduct = 0x0000 bcdDevice = 0x0100 iManufacturer = 0x0001 <MEC> iProduct = 0x0002 <MEC0003> iSerialNumber = 0x0000 <no string> ---------------------------------------------------------------------------- ------------------------ /usr/local/libexec/nut/blazer_usb -DD -a ups 2>&1 | tee -a /usr/local/ups.txt 0.886031 Checking device (0001/0000) (/dev/usb//dev/ugen0.4) 0.927085 - VendorID: 0001 0.927112 - ProductID: 0000 0.927120 - Manufacturer: unknown 0.927127 - Product: unknown 0.927134 - Serial Number: unknown 0.927142 - Bus: /dev/usb 0.927149 - Device release number: 0100 0.927158 Trying to match device 0.927166 Device does not match - skipping
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
