On 6/10/20 6:34 AM, dlfree2 wrote:
Hello
I am using Freenas 11.3 (freebsd like) with a GREENCELL usb ups.
with nut 2.7.4_13 pre installed
But, this ups is not detected as “blazer_usb” on port “auto” neither
"ugen0.4"!
Network UPS Tools - UPS driver controller 2.7.4
Network UPS Tools - Megatec/Q1 protocol USB driver 0.12 (2.7.4)
No supported devices found.
detail below.
Another info :
This driver “blazer_usb” and this UPS have no problem on a raspberry pi3.
With the same configuration!!
What I can do??
Thanks in advance
DL
usbconfig dump_devices_des
ugen0.4: <MEC MEC0003> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps)
pwr=ON (100mA)
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0110
bDeviceClass = 0x0000 <Probed by interface class>
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0008
idVendor = 0x0001
idProduct = 0x0000
Those two values look very strange?! Are you sure, the RasPi sees the
same idVendor & idProduct?
-- Marco
bcdDevice = 0x0100
iManufacturer = 0x0001 <MEC>
iProduct = 0x0002 <MEC0003>
iSerialNumber = 0x0000 <no string>
----------------------------------------------------------------------------------------------------
/usr/local/libexec/nut/blazer_usb -DD -a ups 2>&1 | tee -a
/usr/local/ups.txt
0.886031 Checking device (0001/0000) (/dev/usb//dev/ugen0.4)
0.927085 - VendorID: 0001
0.927112 - ProductID: 0000
0.927120 - Manufacturer: unknown
0.927127 - Product: unknown
0.927134 - Serial Number: unknown
0.927142 - Bus: /dev/usb
0.927149 - Device release number: 0100
0.927158 Trying to match device
0.927166 Device does not match - skipping
_______________________________________________
Nut-upsuser mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
_______________________________________________
Nut-upsuser mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
