I would also be very interested in this topic. Best Regards, Bart
pon., 17 sie 2020, 12:55 użytkownik Marc Franquesa <[email protected]> napisał: > Sorry, because this is not a technical question rather than a Hardware > advice/recommendation. > > I have been using NUT-UPS perfectly for more than 7 years using two > different Eaton/MGE models. > > After a battery replacement (replaced 1 year ago) after 5 years of > service, my current unit seems to behave faulty, as just after 1-2 minutes > of power outage, shows the LB battery flag and sets FSD although having > enough battery charge and runtime. > > I'm now looking to replace the UPS, but after comparing various vendors > and models (and check against the HCL) I found that the Eaton ones are > quite more expensive than other vendors/models. > > I'm thinking to move to a cheaper model, but still have a good device/NUT > support, mainly usb-hid or blazer-usb drivers. > > For one side I'm happy with Eaton, however they are quite expensive, and > although in the past supported NUT development I'm not sure if this is > still the same collaborative support. > > On the other hand I'm looking to get a Salicru SPS, I've read some good > (and also some bad) reviews of the devices but would like to know of any > NUT-user experience. > > So could anyone with experience regarding Salicru/blazer-ups with NUT ? > > Should I give them a try or better stick with Eaton as well supported and > good device? > > Thanks > _______________________________________________ > Nut-upsuser mailing list > [email protected] > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
