Obviously, I'm biased so don't count my vote, but let me know if you're interested in chatting about Tripp Lite. I try to help out on the mailing list when I can.
More on topic, these are the threads on the mailing list I found with Salicru and NUT (both older posts): https://alioth-lists.debian.net/pipermail/nut-upsuser/2015-February/009532.html https://alioth-lists.debian.net/pipermail/nut-upsuser/2011-July/006981.html <http://www.tripplite.com/> ________________________________ From: Nut-upsuser <nut-upsuser-bounces+david_zomaya=tripplite....@alioth-lists.debian.net> on behalf of Bartosz <[email protected]> Sent: Monday, August 17, 2020 4:41:54 PM To: Marc Franquesa Cc: [email protected] Subject: [EXTERNAL] Re: [Nut-upsuser] Device recommendation Salicru This is an EXTERNAL email. Please take a moment and think before clicking any links or opening any attachments from this email. If suspicious, please forward to [email protected] for review. ________________________________ I would also be very interested in this topic. Best Regards, Bart pon., 17 sie 2020, 12:55 użytkownik Marc Franquesa <[email protected]<mailto:[email protected]>> napisał: Sorry, because this is not a technical question rather than a Hardware advice/recommendation. I have been using NUT-UPS perfectly for more than 7 years using two different Eaton/MGE models. After a battery replacement (replaced 1 year ago) after 5 years of service, my current unit seems to behave faulty, as just after 1-2 minutes of power outage, shows the LB battery flag and sets FSD although having enough battery charge and runtime. I'm now looking to replace the UPS, but after comparing various vendors and models (and check against the HCL) I found that the Eaton ones are quite more expensive than other vendors/models. I'm thinking to move to a cheaper model, but still have a good device/NUT support, mainly usb-hid or blazer-usb drivers. For one side I'm happy with Eaton, however they are quite expensive, and although in the past supported NUT development I'm not sure if this is still the same collaborative support. On the other hand I'm looking to get a Salicru SPS, I've read some good (and also some bad) reviews of the devices but would like to know of any NUT-user experience. So could anyone with experience regarding Salicru/blazer-ups with NUT ? Should I give them a try or better stick with Eaton as well supported and good device? Thanks _______________________________________________ Nut-upsuser mailing list [email protected]<mailto:[email protected]> https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser<https://urldefense.proofpoint.com/v2/url?u=https-3A__alioth-2Dlists.debian.net_cgi-2Dbin_mailman_listinfo_nut-2Dupsuser&d=DwMFaQ&c=f9s1WCuF-N6cmD_YaZ7gBg&r=lhr3k4au5dVQgHY_iS-v_t9g8PHVkn8Px_wyaupZGfQ&m=zQkS5rKijlOb8yVeJ-tYkezT76eHg5p9iCR28DOA0N0&s=hGGf_uVEuMJsX48hcCuHEj8ydb1eeGTZ1EFn_VklYXQ&e=> ________________________________ This message is for the addressee's use only. It may contain confidential information. If you receive this message in error, please delete it and notify the sender. Tripp Lite disclaims all warranties and liabilities, and assumes no responsibility for viruses which may infect an email sent to you from Tripp Lite and which damage your electronic systems or information. It is your responsibility to maintain virus detection systems to prevent damage to your electronic systems and information.
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
