Brilliant, thank you David! In Truenas Core I was able to add productid = 3026 to the Auxillary Parameters (ups.conf) field for my UPS.
On Sun, Jan 3, 2021, 1:15 PM David Zomaya <[email protected]> wrote: > Please excuse brevity, I'm on mobile. > > You should be able to add the productid to the ups.conf > > See > https://alioth-lists.debian.net/pipermail/nut-upsdev/2020-June/007473.html > > Thank you, > David Zomaya > Tripp Lite > ------------------------------ > *From:* Nut-upsuser <nut-upsuser-bounces+david_zomaya= > [email protected]> on behalf of Tim Gallagher via > Nut-upsuser <[email protected]> > *Sent:* Sunday, January 3, 2021 11:08:24 AM > *To:* [email protected] > *Subject:* [EXTERNAL] [Nut-upsuser] My new Tripplite UPS isn't supported > > This is an *EXTERNAL* email. Please take a moment and think before > clicking any links or opening any attachments from this email. If > suspicious, please forward to [email protected] for review. > ------------------------------ > I purchased a Tripplite SMART500RT1U which NUT HCL shows as supported. I > am running TrueNAS Core 12.0-U1 which has NUT functionality. The UPS > identifies immediately when plugged in with USB, driver set to usbhid-ups, > port doesn't matter but set to AUTO. It looks like this productid > (09ae:3026) needs added to the driver. Until that happens can I add the -x > ProductID somewhere to make it run correctly? > > *Problem*: UPS not yet supported > % sudo upsdrvctl start > Network UPS Tools - UPS driver controller 2.7.4 > Network UPS Tools - Generic HID driver 0.41 (2.7.4) > USB communication driver 0.33 > Duplicate driver instance detected! Terminating other driver! > This TrippLite device (09ae:3026) is not (or perhaps not yet) supported > by usbhid-ups. Please make sure you have an up-to-date version of NUT. If > this does not fix the problem, try running the driver with the > '-x productid=3026' option. Please report your results to the NUT user's > mailing list <[email protected]>. > > No matching HID UPS found > Driver failed to start (exit status=1) > > *Driver ran with productid as suggested* > % sudo /usr/local/libexec/nut/usbhid-ups -a SMART500RT1U -x productid=3026 > Network UPS Tools - Generic HID driver 0.41 (2.7.4) > USB communication driver 0.33 > Using subdriver: TrippLite HID 0.82 > > *succes? * > ------------------------------ > This message is for the addressee's use only. It may contain confidential > information. If you receive this message in error, please delete it and > notify the sender. Tripp Lite disclaims all warranties and liabilities, and > assumes no responsibility for viruses which may infect an email sent to you > from Tripp Lite and which damage your electronic systems or information. It > is your responsibility to maintain virus detection systems to prevent > damage to your electronic systems and information. >
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
