> Yes in the LCD. The WEBCARDLX GUI gives connection refused when I try to open > it in a browser. Can you login via SSH?
I ask because assuming HTTP(S) is enabled... not getting into the GUI suggests a different problem... one that might be contributing to data not updating in Network UPS Tools. Generally, I'd approach this by: 1- Making sure we get the WEBCARDLX working and reporting data correctly in the GUI/SSH/SNMP (basically, data should match the LCD or be very close to it) 2- Look at possible issues with NUT If you can't get in via SSH either, can you reboot the WEBCARDLX (does not impact UPS output) either via the reset button (just below/above the middle of the two Ethernet LEDs) or by removing and reinserting the WEBCARDLX and try again? Thank you, David Zomaya Tripp Lite ________________________________ This message is for the addressee's use only. It may contain confidential information. If you receive this message in error, please delete it and notify the sender. Tripp Lite disclaims all warranties and liabilities, and assumes no responsibility for viruses which may infect an email sent to you from Tripp Lite and which damage your electronic systems or information. It is your responsibility to maintain virus detection systems to prevent damage to your electronic systems and information. _______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
