Good evening folks,
So I configured NUT on a Raspberry Pi 4 both UPS are connected over USB
however the switch from AC Power to Battery seems to be delayed on the
NUT communication would anyone have any ideas? The Pi Reports that the
UPS is on battery around 30 seconds later I think this delay is long. I
have tested it on a physical computer and the detection is around 5 to 6
seconds with the communication from the UPS to the machine. I have
tested both USB 2 and 3 Ports but same problem
Specs of Pi
Raspberry Pi4
Debian Raspbian
32GB Sandisk SSD
POE Hat
Both UPS's are APC Smart 1000 non Display
Regards
Jack
--
VioletDragons Network
VioletDragons Projects
Violets Data Center
Malvern
United Kingdom
Phone: +44(0)7413 601663
Email: [email protected]
Website: www.violetdragonsnetwork.co.uk
_______________________________________________
Nut-upsuser mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
