I would guess configuration of `pollonly` vs. interrupts (lack of pollonly) can play a difference - at least worth trying. Different HW (mis-)behaves differently with these option, no "one to rule them all".
Jim On Sat, Jan 7, 2023, 20:44 jack Bamford via Nut-upsuser < [email protected]> wrote: > Good evening folks, > > So I configured NUT on a Raspberry Pi 4 both UPS are connected over USB > however the switch from AC Power to Battery seems to be delayed on the > NUT communication would anyone have any ideas? The Pi Reports that the > UPS is on battery around 30 seconds later I think this delay is long. I > have tested it on a physical computer and the detection is around 5 to 6 > seconds with the communication from the UPS to the machine. I have > tested both USB 2 and 3 Ports but same problem > > Specs of Pi > > Raspberry Pi4 > > Debian Raspbian > > 32GB Sandisk SSD > > POE Hat > > Both UPS's are APC Smart 1000 non Display > > Regards > > Jack > > -- > VioletDragons Network > VioletDragons Projects > Violets Data Center > Malvern > United Kingdom > Phone: +44(0)7413 601663 > Email: [email protected] > Website: www.violetdragonsnetwork.co.uk > > > _______________________________________________ > Nut-upsuser mailing list > [email protected] > https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser >
_______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
