On 4/24/23 19:54, Jim Klimov wrote:
For the final part after the build, I'd do this to make sure systemd units
get defined, activated and started:
:; make -j 4 all && make -j 4 check && \
{ sudo systemctl stop nut-monitor nut-server || true ; } && \
{ sudo systemctl stop nut-driver.service || true ; } && \
{ sudo systemctl stop nut-driver.target || true ; } && \
{ sudo systemctl stop nut.target || true ; } && \
sudo make install && \
sudo systemctl daemon-reload && \
sudo systemd-tmpfiles --create && \
sudo systemctl disable nut.target nut-driver.target nut-monitor
nut-server nut-driver-enumerator.path nut-driver-enumerator.service &&
\
sudo systemctl enable nut.target nut-driver.target nut-monitor
nut-server nut-driver-enumerator.path nut-driver-enumerator.service &&
\
{ sudo systemctl restart udev || true ; } && \
sudo systemctl restart nut-driver-enumerator.service nut-monitor nut-server
I'll do this but tommorrow, Thanks Jim.
On Tue, Apr 25, 2023 at 1:43 AM gene heskett <[email protected]> wrote:
On 4/24/23 17:11, Jim Klimov wrote:
You mentioned the RPi runs a buster-based OS?
yup raspios, buster. I'd have moved on but the bullseye python is too
new and linuxcnc can't use it. The lcnc guys are busy making it work
for bookworm and haven't had time to backport for bullseye. I have a
couple SSD's plugged into the usb3 ports on the pi4b and have the
complete lcnc buildbot available. My whole system is behind an old
buffalo router running dd-wrt, so I'm well insulated from the black hats.
I suppose the simplest way is you can forgo the init-scripts and retain
just the systemd services (as listed in the article - including the
nut-driver-enumerator which would create [email protected] based
in
the ups.conf section).
Jim
humm, you can elaborate on that? There are several different sets there
and I must have followed the wrong set.
Thanks Jim.
[...]
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/>
_______________________________________________
Nut-upsuser mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
