On 4/25/23 18:11, Jim Klimov wrote:
ups.load:8 is 8% right? just the RPi or more serious load? At lower values,
the gauge might not be precise, maybe...
8 is max, depending on the mood its in it might show 0% for hours at a
time, that particular outlet, checked with a kil-a-watt is below what
the kil-a-watt can read. Does not include an 11 watt monitor but does
include everything else powered by a 5 volt, 5 amp supply, which is a
7i90FD interface card and the three 7i40TA cards that buffer the fpga's
puny outputs in addition to the rpi4b. That power level doesn't bither
me a bot. All machine power is controlled by the rpi4b, it controls 2,
60 amp SSR's that switch off the 240 to the machine if linuxcnc is not
running, and it wasn't when the shell freeze occurred.
Wondering why the shell froze - could be systemd waiting for startup to
complete (driver and other daemonware signalling it is forked and ready),
which might take time. The `journald -lxn` may reveal more with all logs
and timings, if you want to investigate. Might be just a slow RPi and/or
I/O with the UPS. We had SNMP ones taking close to 3 minutes to init, when
stressing with a hundred drivers on a smallish ARM box.
journald can't be found, by me or root.
Jim
On Tue, Apr 25, 2023, 21:30 gene heskett <[email protected]> wrote:
On 4/24/23 20:11, gene heskett wrote:
sudo systemctl restart nut-driver-enumerator.service nut-monitor
nut-server
Got to the last line, but shell is hung now. Except it finally completed
after several minutes, and upsc myups output looks normal. Strange.
pi@rpi4:/media/pi/workspace/nut $ upsc myups
Init SSL without certificate database
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 20
battery.mfr.date: CPS
battery.runtime: 4410
battery.runtime.low: 300
battery.type: PbAcid
battery.voltage: 14.5
battery.voltage.nominal: 12
device.mfr: CPS
device.model: CP625HGa
device.type: ups
driver.debug: 0
driver.flag.allow_killpower: 0
driver.name: usbhid-ups
driver.parameter.offdelay: 120
driver.parameter.ondelay: 0
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.synchronous: auto
driver.state: quiet
driver.version: 2.8.0-Windows-876-g5a5ce85b1
driver.version.data: CyberPower HID 0.8
driver.version.internal: 0.49
driver.version.usb: libusb-1.0.22 (API: 0x1000106)
input.transfer.high: 0
input.transfer.low: 0
input.voltage: 125.0
input.voltage.nominal: 120
output.voltage: 125.0
ups.beeper.status: enabled
ups.delay.shutdown: 120
ups.delay.start: 0
ups.load: 8
ups.mfr: CPS
ups.model: CP625HGa
ups.productid: 0501
ups.realpower.nominal: 375
ups.status: OL
ups.test.result: No test initiated
ups.timer.shutdown: -60
ups.timer.start: 0
ups.vendorid: 0764
pi@rpi4:/media/pi/workspace/nut $
Note the ups.load ;o)>
Anything there I should try to change?
Thanks Jim.
Take care & stay well.
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/>
_______________________________________________
Nut-upsuser mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
Cheers, Gene Heskett.
--
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
- Louis D. Brandeis
Genes Web page <http://geneslinuxbox.net:6309/>
_______________________________________________
Nut-upsuser mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
