I thought I could clear the Eaton 5PX battery message. I've failed. The following is based on https://haefelfinger.ch/posts/2020/2020-09-23-reset-battery-alert-eaton-5p-ups/
I shutdown the UPS. I disconnected it from power. I disconnected both the main battery and the external battery pack. I pressed the power on button several times, until the clicking stopped.... I waited 10 minutes. Connect it all back up. The warning persists. The webpage for the UPS the battery status is OK. That must be charge level (90%). If I check from the command line: [19:41 r730-01 dvl ~] % upsc ups02 | grep -i alarm ups.alarm: Replace battery! ups.status: ALARM OL CHRG RB I've gone though the front panel options and didn't see anything for resetting this warning. I have found one suggestion: update firmware. Ideas please? -- Dan Langille [email protected] _______________________________________________ Nut-upsuser mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/nut-upsuser
