Arjen de Korte wrote:
Before anything else, please upgrade to the latest stable version (2.0.3).
The one you're using now is past its 'use by' date.
Thanks Arjen,
I've now removed the Slackware package and installed from source the
latest version.
I see that the "powermust" is included in this version, and I've tried
using it.
[EMAIL PROTECTED]:/usr/local/ups# /usr/local/ups/bin/upsdrvctl start
Network UPS Tools - UPS driver controller 2.0.3
Network UPS Tools - Mustek PowerMust UPS driver 1.1 (2.0.3)
Carlos Rodrigues (c) 2003, 2004
Mustek PowerMust UPS, or compatible, not detected.
Driver failed to start (exit status=1)
Below is my config file.
[EMAIL PROTECTED]:/usr/local/ups# cat etc/ups.conf
[SquareOne]
driver = powermust
port = /dev/ttyS0
desc = "Square One QP1010"
I've tried using the following, and none of them seem to give me anything.
powercom,gamatronic,blazer,fentonups and a few others so far.
I'm beggining to wonder if I have a faulty UPS, unfortunately, I've
never seen the UPS, and I can't guarentee that it's connected properly,
as I wasn't the one who connected it because we maintain the server
remotely.
Thanks in advance for any assistance!
Regards Neil.
--
This email and all contents are subject to the following disclaimer:
http://www.dcdata.co.za/emaildisclaimer.html
_______________________________________________
Nut-upsuser mailing list
[email protected]
http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
