Hi Vlado, your issue seems to be an issue of lower-level USB support. Not only does NUT fail to find your ups, but it fails to find *any* USB devices or controllers. Normal output from "newhidups -u root -DDDDD auto" should look like this:
Network UPS Tools: New USB/HID UPS driver 0.28 (2.1.0) debug level is '5' Checking device (0000/0000) (003/001) - VendorID: 0000 - ProductID: 0000 - Manufacturer: Linux 2.6.11-1.1369_FC4 uhci_hcd - Product: UHCI Host Controller - Serial Number: 0000:00:1d.1 - Bus: 003 Trying to match device Device does not match - skipping Checking device (0000/0000) (002/001) - VendorID: 0000 - ProductID: 0000 - Manufacturer: Linux 2.6.11-1.1369_FC4 uhci_hcd - Product: UHCI Host Controller - Serial Number: 0000:00:1d.0 - Bus: 002 Trying to match device Device does not match - skipping Checking device (04B3/310B) (002/002) - VendorID: 04b3 - ProductID: 310b - Manufacturer: unknown - Product: unknown - Serial Number: unknown - Bus: 002 Trying to match device Device does not match - skipping [...] No appropriate HID device found No matching USB/HID UPS found Perhaps you don't have libusb installed? Is "lsusb" showing anything on your system? -- Peter Vladimir Botka wrote: > > Hello, > > Help me please with *newhidups* setup. Does it work for someone on *BSD ? > > > Here is the data. > --------------------------------------------------------------- > > *** FreeBSD > root.srv# uname -a > FreeBSD xxxxxx.dyndns.info 5.3-RELEASE FreeBSD 5.3-RELEASE #2: Tue Feb 8 > 07:38:22 UTC 2005 > [EMAIL PROTECTED]:/usr/src/sys/i386/compile/SRV i386 > > *** NUT ver.2.0.3 > root.srv# ll /var/db/pkg/ | grep nut > drwxr-xr-x 2 root wheel 512 May 6 19:53 nut-2.0.3 > drwxr-xr-x 2 root wheel 512 May 6 19:53 nut-usb-2.0.3 > > *** usbd can see the UPS on /dev/uhid0 > root.srv# usbdevs -v -d -a 2 > Controller /dev/usb0: > addr 2: low speed, self powered, config 1, Back-UPS CS 500 FW:808.q5.I USB > FW:q5(0x0002), American Power Conversion(0x051d), rev 0.06 > uhid0 > Controller /dev/usb1: > Controller /dev/usb2: > Controller /dev/usb3: > > *** HERE IS THE PROBLEM > root.srv# /usr/local/libexec/nut/newhidups -u root -DDDDD auto > Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3) > > debug level is '5' > No appropriate HID device found > No matching USB/HID UPS found > > root.srv# /usr/local/libexec/nut/newhidups -a myups -u root -DDDDD /dev/uhid0 > Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3) > > debug level is '5' > No appropriate HID device found > No matching USB/HID UPS found > > root.srv# cat /usr/local/etc/nut/ups.conf > [myups] > driver = newhidups > port = /dev/uhid0 > desc = "Back-UPS CS 500" > > ------------------------------------------------------------------ > > Thank you for your afford. > > Cheers, > > -vlado > > _______________________________________________ > Nut-upsuser mailing list > [email protected] > http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser > _______________________________________________ Nut-upsuser mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser
